Vivotek IP7133 (WIRED) manual

Page 29

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

4. The live video will be displayed in your player.

RTSP port /RTP port for video, audio/ RTCP port for video, audio

The RTSP (Real-Time Streaming Protocol) controls the delivery of streaming media. By default, the port number is set to 554.

The RTP (Real-time Transport Protocol) is used to deliver video and audio data to the clients. By default, the RTP port for video is set to 5556 and the RTP port for audio is set to 5558.

The RTCP (Real-time Transport Control Protocol) allows the Network Camera to transmit the data by monitoring Internet traffic volume. By default, the RTCP port for video is set to 5557 and the RTCP port for audio is set to 5559.

The five ports can be changed between 1025 and 65535. The RTP port must be an even number and the RTCP port is RTP port number plus one, and thus always be odd. When the RTP port changes, the RTCP port will change accordingly.

If the RTP ports are incorrectly assigned, the following warning message is displayed:

Multicast settings for stream 1 / Multicast settings for stream 2: Select the Always multicast to enable multicast for stream 1 or stream 2. Unicast video transmission delivers a stream through point-to-point transmission; multicast, on the other hand, sends a stream to the multicast group address and allows multiple clients to acquire the stream by requesting a copy from the Multicast group address.

The five ports can be changed between 1025 and 65535. The multicast RTP port must be an even number and the multicast RTCP port number is the multicast RTP port number plus one, and thus it is always be odd. When the multicast RTP port changes, the multicast RTCP port will change accordingly.

If the multicast RTP video ports are incorrectly assigned, the following warning message is displayed:

Multicast TTL [1~255]:The multicast TTL (Time to live) is the value that tells the router the range a packet can be forwarded.

NOTE

►To utilize the RTSP streaming authentication, make sure that your have set a password for the Network Camera first; please refer to Security on page 22 for details.

User's Manual - 29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents IP Surveillance Table of Contents Read before use Package contentsPhysical description ConnectorsDI/DO Diagram Hardware Reset Network deployment InstallationInternet connection with static IP Software installation Using web browsers Accessing the Network CameraPage Using Rtsp players MPEG-4 Using 3GPP-compatible mobile devicesUsing Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System Time SystemSystem DI and do Security Root PasswordAdd User Manage UserNetwork Type NetworkPPPoE Point-to-point over Ethernet Page Http FTP Rtsp Streaming Page Wireless LAN IP7134 only Page Page Ddns Ddns Dynamic domain name serviceCustomSafe100 Delete allowed list / Delete denied list Access listAllowed list / Denied list Audio and video Video settingsImage Settings Privacy mask Page Audio settings Motion detection To enable motion detection, follow the steps belowPercentage = 30% Application Media SettingsSnapshot20080104100341 Server Settings Page Page Event Settings Delete Current Log System logRemote Log View parameters Restore MaintenanceReboot Upload / Export Daylight Saving Time Configuration File Upgrade Firmware IP7133 Appendix URL Commands of the Network CameraSecurity Level General CGI URL Syntax and ParametersGet Server Parameter Values Security Level SUB-DIRECTORY DescriptionParameter pair Parameter Value Description Set Server Parameter ValuesValid Values Description Available parameters on the serverName Value Security Description GMT 0630 Rangoon GMT 0700 Bangkok, Hanoi, Jakarta MODEL-BRAND-VERSION Group security Value Security Description NameSubgroup of network rtsp HEX, Ascii OPEN, SharedGroup ipfilter AES, TkipVGA Cmos = 4CIF QcifCIF Jpeg CmosGroup imagepreview DHS TZOLogemerg LoginfoLogalert LogcritPage Mjpeg Parameter Value Security Description One bit represents one digital input. The LSB Actiondoi0~ndo-1 Enable or disable trigger digital output Drive the Digital Output Query Status of the Digital Input Do0=state\r\n Do1=state\r\n Do2=state\r\n Do3=state\r\n Query Status of the Digital OutputAccount Management Parameter Value Default DescriptionCapture Single Snapshot System Logs System Information Upgrade FirmwareValue Description IP FilteringOpen the Network Stream Get SDP of Streams．AGC, AWB, AES Technical SpecificationsTechnology License Notice Liability Electromagnetic Compatibility EMC
Top Page Image Contents