Vivotek IP7133 (WIRED) manual Maintenance, Reboot, Restore

Page 52

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Maintenance

This chapter explains how to restore the Network Camera to factory default, upgrade firmware version, etc.

Reboot

This feature allows you to turn off and then turn on the Network Camera. It takes about one ~ two minutes to complete the process. When completed, the live video will be displayed in your browser. The following message is displayed during the rebooting process.

If the connection fails after rebooting, manually enter the IP address of the Network Camera in the address field to resume the connection.

Restore

This feature allows you to restore the Network Camera to factory default. Two settings can be excluded:

Network Type: Select this option to retain the Network Type settings (please refer to Network Type on page 23).

Daylight Saving Time: Select this option to retain the Daylight Saving Time settings (please refer to System on page 20)

If none of the options is selected, all settings will be restored to factory default.

The following message is displayed during the restoring process.

52 - User's Manual

Image 52

Contents IP Surveillance Table of Contents Package contents Read before useConnectors Physical descriptionDI/DO Diagram Hardware Reset Installation Network deploymentInternet connection with static IP Software installation Accessing the Network Camera Using web browsersPage Using Rtsp players Using 3GPP-compatible mobile devices MPEG-4Using Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System SystemSystem Time DI and do Root Password SecurityAdd User Manage UserNetwork Network TypePPPoE Point-to-point over Ethernet Page Http FTP Rtsp Streaming Page Wireless LAN IP7134 only Page Page Ddns Dynamic domain name service DdnsCustomSafe100 Allowed list / Denied list Access listDelete allowed list / Delete denied list Video settings Audio and videoImage Settings Privacy mask Page Audio settings To enable motion detection, follow the steps below Motion detectionPercentage = 30% Media Settings ApplicationSnapshot20080104100341 Server Settings Page Page Event Settings Delete Remote Log System logCurrent Log View parameters Reboot MaintenanceRestore Upload / Export Daylight Saving Time Configuration File Upgrade Firmware IP7133 URL Commands of the Network Camera AppendixGeneral CGI URL Syntax and Parameters Security LevelGet Server Parameter Values Security Level SUB-DIRECTORY DescriptionParameter pair Set Server Parameter Values Parameter Value DescriptionAvailable parameters on the server Valid Values DescriptionName Value Security Description GMT 0630 Rangoon GMT 0700 Bangkok, Hanoi, Jakarta MODEL-BRAND-VERSION Group security Name Value Security DescriptionSubgroup of network rtsp OPEN, Shared HEX, AsciiAES, Tkip Group ipfilterVGA Cmos = CIF Qcif4CIF Cmos JpegGroup imagepreview TZO DHSLoginfo LogemergLogalert LogcritPage Mjpeg Parameter Value Security Description One bit represents one digital input. The LSB Actiondoi0~ndo-1 Enable or disable trigger digital output Drive the Digital Output Query Status of the Digital Input Query Status of the Digital Output Do0=state\r\n Do1=state\r\n Do2=state\r\n Do3=state\r\nCapture Single Snapshot Parameter Value Default DescriptionAccount Management System Logs Upgrade Firmware System InformationIP Filtering Value DescriptionGet SDP of Streams Open the Network StreamTechnical Specifications ．AGC, AWB, AESTechnology License Notice Electromagnetic Compatibility EMC Liability