Vivotek IP7133 (WIRED) manual

Page 47

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

HTTP: Select to send the media to a HTTP server when a trigger is activated.

■URL: Enter the URL of the HTTP server.

■User name: Enter the user name.

■Password: Enter the password.

To verify if the HTTP settings are correctly configured, click Test. The result will be shown in a pop-up window. If it works, you will also receive a test.txt file on the HTTP server.

When completed, click Save to enable the settings and then click Close to exit this page. The new server name will appear in the server drop-down list on the application page as below. To remove a server setting from the list, select a server name from the drop-down list and then click Delete. Note that only when the server setting is not being applied to an event setting can it be deleted.

User's Manual - 47

Image 47

Contents IP Surveillance Table of Contents Read before use Package contentsPhysical description ConnectorsDI/DO Diagram Hardware Reset Network deployment InstallationInternet connection with static IP Software installation Using web browsers Accessing the Network CameraPage Using Rtsp players MPEG-4 Using 3GPP-compatible mobile devicesUsing Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System Time SystemSystem DI and do Manage User Root PasswordSecurity Add UserNetwork Type NetworkPPPoE Point-to-point over Ethernet Page Http FTP Rtsp Streaming Page Wireless LAN IP7134 only Page Page Ddns Ddns Dynamic domain name serviceCustomSafe100 Delete allowed list / Delete denied list Access listAllowed list / Denied list Audio and video Video settingsImage Settings Privacy mask Page Audio settings Motion detection To enable motion detection, follow the steps belowPercentage = 30% Application Media SettingsSnapshot20080104100341 Server Settings Page Page Event Settings Delete Current Log System logRemote Log View parameters Restore MaintenanceReboot Upload / Export Daylight Saving Time Configuration File Upgrade Firmware IP7133 Appendix URL Commands of the Network CameraSecurity Level SUB-DIRECTORY Description General CGI URL Syntax and ParametersSecurity Level Get Server Parameter ValuesParameter pair Parameter Value Description Set Server Parameter ValuesValid Values Description Available parameters on the serverName Value Security Description GMT 0630 Rangoon GMT 0700 Bangkok, Hanoi, Jakarta MODEL-BRAND-VERSION Group security Value Security Description NameSubgroup of network rtsp HEX, Ascii OPEN, SharedGroup ipfilter AES, TkipVGA Cmos = 4CIF QcifCIF Jpeg CmosGroup imagepreview DHS TZOLogcrit LoginfoLogemerg LogalertPage Mjpeg Parameter Value Security Description One bit represents one digital input. The LSB Actiondoi0~ndo-1 Enable or disable trigger digital output Drive the Digital Output Query Status of the Digital Input Do0=state\r\n Do1=state\r\n Do2=state\r\n Do3=state\r\n Query Status of the Digital OutputAccount Management Parameter Value Default DescriptionCapture Single Snapshot System Logs System Information Upgrade FirmwareValue Description IP FilteringOpen the Network Stream Get SDP of Streams．AGC, AWB, AES Technical SpecificationsTechnology License Notice Liability Electromagnetic Compatibility EMC