Vivotek IP7133 (WIRED) manual Wireless LAN IP7134 only

Page 30

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Wireless LAN (IP7134 only)

SSID (Service Set Identifier): It is a name that identifies a wireless network. Access Points and wireless clients attempting to connect to a specific WLAN (Wireless Local Area Network) must use the same SSID. The default setting is default. Note: The maximum length of SSID is 32 single-byte characters and SSID can’t be any of “, <, > and space character.

Wireless mode: Clicking on the pull-down menu to select from the following options:

Infrastructure: Make the Network Camera connect to the WLAN via an Access Point. (The default setting)

Ad-Hoc: Make the Network Camera connect directly to a host equipped with a wireless adapter in a peer- to-peer environment.

Channel: While in infrastructure mode, the channel is selected automatically to match the channel setting for the selected Access Point. In Ad-Hoc mode, the channel must be manually set to the same channel for each wireless adapter. The default channel setting depends on the installed region.

TX rate: This field is for selecting the maximum transmission rate on the network. The default setting is “auto”, that is the Network Camera will try to connect to the other wireless device with highest transmitting rate.

Security: Select the data encrypt method. There are four types from low to high: none, WEP, WPA-PSK, and WPA2-PSK.

1.None: No data encryption.

30 - User's Manual

Image 30

Contents IP Surveillance Table of Contents Package contents Read before useConnectors Physical descriptionDI/DO Diagram Hardware Reset Installation Network deploymentInternet connection with static IP Software installation Accessing the Network Camera Using web browsersPage Using Rtsp players Using 3GPP-compatible mobile devices MPEG-4Using Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System SystemSystem Time DI and do Add User Root PasswordSecurity Manage UserNetwork Network TypePPPoE Point-to-point over Ethernet Page Http FTP Rtsp Streaming Page Wireless LAN IP7134 only Page Page Ddns Dynamic domain name service DdnsCustomSafe100 Access list Allowed list / Denied listDelete allowed list / Delete denied list Video settings Audio and videoImage Settings Privacy mask Page Audio settings To enable motion detection, follow the steps below Motion detectionPercentage = 30% Media Settings ApplicationSnapshot20080104100341 Server Settings Page Page Event Settings Delete System log Remote LogCurrent Log View parameters Maintenance RebootRestore Upload / Export Daylight Saving Time Configuration File Upgrade Firmware IP7133 URL Commands of the Network Camera AppendixGet Server Parameter Values General CGI URL Syntax and ParametersSecurity Level Security Level SUB-DIRECTORY DescriptionParameter pair Set Server Parameter Values Parameter Value DescriptionAvailable parameters on the server Valid Values DescriptionName Value Security Description GMT 0630 Rangoon GMT 0700 Bangkok, Hanoi, Jakarta MODEL-BRAND-VERSION Group security Name Value Security DescriptionSubgroup of network rtsp OPEN, Shared HEX, AsciiAES, Tkip Group ipfilterVGA Cmos = Qcif CIF4CIF Cmos JpegGroup imagepreview TZO DHSLogalert LoginfoLogemerg LogcritPage Mjpeg Parameter Value Security Description One bit represents one digital input. The LSB Actiondoi0~ndo-1 Enable or disable trigger digital output Drive the Digital Output Query Status of the Digital Input Query Status of the Digital Output Do0=state\r\n Do1=state\r\n Do2=state\r\n Do3=state\r\nParameter Value Default Description Capture Single SnapshotAccount Management System Logs Upgrade Firmware System InformationIP Filtering Value DescriptionGet SDP of Streams Open the Network StreamTechnical Specifications ．AGC, AWB, AESTechnology License Notice Electromagnetic Compatibility EMC Liability