Vivotek IP7133 (WIRED) manual Audio settings

Page 40

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

■Maximum frame rate

This limits the maximal refresh frame rate per second. Set the frame rate higher for a smoother video quality.

If the power line frequency is set to 50Hz, the frame rates are selectable at the following rates: 1fps, 2fps, 3fps, 5fps, 8fps, 10fps, 15fps, 20fps and 25fps. If the power line frequency is set to 60Hz, the frame rates are selectable at the following rates: 1fps, 2fps, 3fps, 5fps, 8fps, 10fps, 15fps, 20fps, 25fps, and 30fps.

■ Video quality

The video qualities are selectable at the following settings: Medium, Standard, Good, Detailed, and Excellent.

Audio settings

Mute: Select this option to disable audio transmission from the Network Camera to all clients. Note that if mute mode is turned on, no audio data will be transmitted to all clients even though the audio transmission is enabled on the Client Settings page. In that case, the following message is displayed.

Internal microphone input gain: There are two options for external microphone input gain, 0db and 20db.

Audio type: Select audio codec AAC or GSM-AMR and the bit rate.

■AAC targets at performing good sound quality at the cost of higher bandwidth consumption. The bit rates are selectable at the following rates: 16Kbps, 32Kbps, 48Kbps, 64Kbps, 96Kbps and128Kbps.

■GSM-ARM is designed to optimize speech quality and requires less bandwidth. The bit rates are selectable at the following rates: 4.75Kbps, 5.15Kbps, 5.90Kbps, 6.7Kbps, 7.4Kbps, 7.95Kbps, 10.2Kbps and 12.2Kbps.

When completed with the settings on this page, click Save to enable the settings.

40 - User's Manual

Image 40

Contents IP Surveillance Table of Contents Package contents Read before useConnectors Physical descriptionDI/DO Diagram Hardware Reset Installation Network deploymentInternet connection with static IP Software installation Accessing the Network Camera Using web browsersPage Using Rtsp players Using 3GPP-compatible mobile devices MPEG-4Using Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System SystemSystem Time DI and do Root Password SecurityAdd User Manage UserNetwork Network TypePPPoE Point-to-point over Ethernet Page Http FTP Rtsp Streaming Page Wireless LAN IP7134 only Page Page Ddns Dynamic domain name service DdnsCustomSafe100 Allowed list / Denied list Access listDelete allowed list / Delete denied list Video settings Audio and videoImage Settings Privacy mask Page Audio settings To enable motion detection, follow the steps below Motion detectionPercentage = 30% Media Settings ApplicationSnapshot20080104100341 Server Settings Page Page Event Settings Delete Remote Log System logCurrent Log View parameters Reboot MaintenanceRestore Upload / Export Daylight Saving Time Configuration File Upgrade Firmware IP7133 URL Commands of the Network Camera AppendixGeneral CGI URL Syntax and Parameters Security LevelGet Server Parameter Values Security Level SUB-DIRECTORY DescriptionParameter pair Set Server Parameter Values Parameter Value DescriptionAvailable parameters on the server Valid Values DescriptionName Value Security Description GMT 0630 Rangoon GMT 0700 Bangkok, Hanoi, Jakarta MODEL-BRAND-VERSION Group security Name Value Security DescriptionSubgroup of network rtsp OPEN, Shared HEX, AsciiAES, Tkip Group ipfilterVGA Cmos = CIF Qcif4CIF Cmos JpegGroup imagepreview TZO DHSLoginfo LogemergLogalert LogcritPage Mjpeg Parameter Value Security Description One bit represents one digital input. The LSB Actiondoi0~ndo-1 Enable or disable trigger digital output Drive the Digital Output Query Status of the Digital Input Query Status of the Digital Output Do0=state\r\n Do1=state\r\n Do2=state\r\n Do3=state\r\nCapture Single Snapshot Parameter Value Default DescriptionAccount Management System Logs Upgrade Firmware System InformationIP Filtering Value DescriptionGet SDP of Streams Open the Network StreamTechnical Specifications ．AGC, AWB, AESTechnology License Notice Electromagnetic Compatibility EMC Liability