1.Enable IR control: The check box will allow administrator to enable IR controller to move the view of the camera. If only controls through URL commands or web pages are allowed, please clear the select box.
2.Current position: If users want to save the current view as a preset location, input a name for the current video view at “current position”, then click “Add” button. The camera provides 20 preset locations.
3.Preset position: This control will keep a list for preset positions. If “Delete” button is clicked, the current selected position will be remove from the preset list.
4.Dwelling time: This value specifies the stop time of each preset location or the end position of auto pan function.
5.Patrol selection: After users save a list of preset positions, the “Preset locations” box will also keep a list of the preset positions, and once the “Select>” button is clicked, the “Selected location” box will keep a list of patrol stops. The “Remove” button can remove the preset position from the patrol stops. And the “UP”, “DOWN” buttons can adjust the order of the patrol stops. The preset positions can be added to the patrol stops for several times. The camera provides 20 patrol stops.
C.The “Save” button
The button is valid for “Auto pan/patrol speed”, “Enable IR control”, “Dwelling time” and “Patrol selections”. That is: after changing these settings, if “Save” button is not clicked, the setting of the camera will not be changed.
- 40 -
www.vivotek.com