Remote controller
PT3112, PT3122 provide a remote controller to command the pan/tilt command of the camera. The direction control part provides the function as the main web page.
And the Pan/Patrol/Stop functions are also the same as the main web page.
Direction control area
Auto movement control area
“Auto Patrol” This button would command the camera to patrol between the preset positions in the patrol list that can be set on the “Camera control page”. After one patrol cycle, the camera would stop at the same position as the one before the patrol. “Auto Pan” This button would command the camera to pan from the current position to the most left or most right, than to the opposite position. After reaching both vertical end position, the camera would stop at the same position as the one before pan.
“Center” This button would calibrate the camera position to the center position as the camera boots up.
“Stop” This button would stop the auto movement of the camera.
- 42 -
www.vivotek.com
T: 886-2-22404099
F: