Vivotek IP7137 manual System parameters

Page 25

System parameters

"Host name" The text displays the title at the top of the main page.

“Turn off the LED indicator” Check this option to shut off the LED on the rear. It can prevent the camera’s operation being noticed.

"Keep current date and time" Click on this to reserve the current date and time of the Network Camera. An internal real-time clock maintains the date and time even when the power of the system is turned off.

"Sync with computer time" Synchronizes the date and time of the Network Camera with the local computer. The read-only date and time of the PC is displayed as updated. “Manual” Adjust the date and time according to what is entered by the Administrator. Notice the format in the related fields while doing the entry.

“Automatic” Synchronize with the NTP server over the Internet whenever the Network Camera starts up. It will fail if the assigned time-server cannot be reached. “NTP server” Assign the IP address or domain name of the time-server. Leaving the text box blank connects the Network Camera to the default time-servers.

"Time zone" Adjust the time with that of the time-servers for local settings.

“Update interval” Select hourly, daily, weekly, or monthly update with the time on the NTP server.

Remember to click on to immediately validate the changes. Otherwise, the correct time will not be synchronized.

- 24 -

www.vivotek.com

Image 25

Contents Page Technical@vivotek.com Before You Use This Product Table of Contents FTP Configuration file Upgrade firmware Technical specifications Package Contents Hardware installation InstallationTo install in Ethernet Software installationCheck Network Settings Initial Access to the Network CameraAdd Password to prevent Unauthorized Access Authentication How to UseInstalling plug-in Main Screen with Camera View Primary user’s capabilitySnapshot Digital ZoomClient settings Page Re-connect Fine-tuning for Best Performance Administrator’s capabilityFor Best Real-time Video Images Page Opening accounts for new users Protect Network Camera by passwordsBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings Network type Network settingsLAN & PPPoE Get IP address automatically & Use fixed IP addressRtsp Streaming HttpUrl http//Network Camera/setup/network.html Wlan Configuration Tkip AES Page Ddns Access List Audio and Video Video SettingsGeneral Video orientationAudio settings Image Settings FTP Email & FTPUrl http//Network Camera/setup/mailftp.html Motion detection Weekly schedule Application settingsSnapshot file name prefix Send out the snapshot while motion detectionMethod for sending snapshot Sequential operationPage Page System log Viewing system parameters Maintenance Reset and restore TroubleshootingStatus LED Get server parameter values URL commands of the Network CameraMethod GET/POST Set server parameter values Length is the actual length of contentWhere parameter pair is parameter=value\r\n Skip to invoke default server WirelessNetwork CameraAvailable parameters on the server Yyyy/mm/ddBlank Group Security255.255.255.0 192.168.0.99554 Default Group Wireless restart5558 555600000000 0000000000Group IPFilter 0.0640x480 For 256Computer For 60Hz only 512000Gamr for mobile AAC4 for computer128000 12200To take effect Script.vssx IP address Application page CGI command514 Page Maxsize Capture single snapshotAccount management Privilege=conf System logsUpgrade firmware Configuration filePost data Networking Technical specificationsMPEG-4 AAC Technology MPEG-4 Visual Technology Technology License NoticeLiability Electromagnetic Compatibility EMC