Vivotek IP7137 manual Technical specifications, Networking

Page 70

D. Technical specifications

- System

CPU: Vivotek VVTK-1000

RAM: 32MB SDRAM

ROM: 4MB FLASH ROM

-Networking

Protocol

TCP/IP, HTTP, SMTP, FTP, DDNS, UPnP, Telnet, NTP, DNS, DHCP and RTSP

Physical

10 baseT or 100 baseT Fast Ethernet auto negotiation

WLAN

802.11g wireless LAN

- Video

Algorithm supported

MPEG4(simple profile) for streaming video JPEG for still image

Features

Adjustable image size, quality and bit rate Time stamp and text overlay

3 motion detection windows

Resolution

Up to 30/25 frames at 160x120

Up to 30/25 frames at 320x240

Up to 30/25 frames at 640x480

- Camera Specification

1/4 inch color CMOS sensor Resolution: 640x480 1.5Lux/F2.0

AGC, AWB, AES

Electronic shutter: 1/60 ~ 1/15000 second

- Lens

Fixed focal with fine tuning, 4.0mm, F2.0

- 69 -

- Audio

AAC, GSM-AMR

- Microphone

Omni-directional

Frequency: 50 – 16000Hz

S/N ratio: more than 60dB

- LED indicator

Dual color status indicator

- Dimension

35mm(D) * 108mm(W) * 76mm(H)

- Weight

NET. 170g

- Power

Input: 100-240VAC, 50/60Hz, 0.5A

Output: 5VDC, 2A

- Operating Environment

Temperature: 0-50°C/32-122°F

Humidity: 95%RH

- EMI & Safety

CE, FCC

- Viewing system requirement

Operating system

Microsoft Windows 98SE/ME/2000/XP

Browser

Internet Explorer 5.x or above

www.vivotek.com

Image 70
Contents Page Technical@vivotek.com Before You Use This Product Table of Contents FTP Configuration file Upgrade firmware Technical specifications Package Contents Installation Hardware installationSoftware installation To install in EthernetCheck Network Settings Initial Access to the Network CameraAdd Password to prevent Unauthorized Access How to Use AuthenticationInstalling plug-in Primary user’s capability Main Screen with Camera ViewDigital Zoom SnapshotClient settings Page Re-connect Administrator’s capability Fine-tuning for Best PerformanceFor Best Real-time Video Images Page Protect Network Camera by passwords Opening accounts for new usersBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings LAN & PPPoE Network settingsNetwork type Get IP address automatically & Use fixed IP addressHttp Rtsp StreamingUrl http//Network Camera/setup/network.html Wlan Configuration Tkip AES Page Ddns Access List General Video SettingsAudio and Video Video orientationAudio settings Image Settings Email & FTP FTPUrl http//Network Camera/setup/mailftp.html Motion detection Snapshot file name prefix Application settingsWeekly schedule Send out the snapshot while motion detectionSequential operation Method for sending snapshotPage Page System log Viewing system parameters Maintenance Reset and restore TroubleshootingStatus LED Get server parameter values URL commands of the Network CameraMethod GET/POST Length is the actual length of content Set server parameter valuesWhere parameter pair is parameter=value\r\n Available parameters on the server WirelessNetwork CameraSkip to invoke default server Yyyy/mm/ddGroup Security Blank192.168.0.99 255.255.255.0554 5558 Group Wireless restartDefault 5556Group IPFilter 000000000000000000 0.0640x480 For 256Computer 512000 For 60Hz only128000 AAC4 for computerGamr for mobile 12200To take effect Script.vssx IP address Application page CGI command514 Page Capture single snapshot MaxsizeAccount management System logs Privilege=confConfiguration file Upgrade firmwarePost data Technical specifications NetworkingTechnology License Notice MPEG-4 AAC Technology MPEG-4 Visual TechnologyElectromagnetic Compatibility EMC Liability