Vivotek IP7137 manual Software revision upgrade

Page 23

Software revision upgrade

Customers can obtain the up-to-date software from the web site of Vivotek. An easy-to-use Upgrade Wizard is provided to upgrade the Network Camera with just a few clicks. The upgrade function is opened to the Administrator only. To upgrade the system, follow the procedures below.

1.Download the firmware file named “xxx.pkg” from the appropriate product folder.

2.Run the Upgrade Wizard and proceed following the prompts. Refer to the instructions of the Upgrade Wizard for details.

3.Or upgrade firmware from HTTP web page directly

3.The whole process will finish in a few minutes and it will automatically restart the system.

If power fails during the writing process of Flash memory, the program in the

memory of the Network Camera may be destroyed permanently. If the Network Camera cannot restart properly, ask your dealer for technical service.

- 22 -

www.vivotek.com

Image 23

Contents Page Technical@vivotek.com Before You Use This Product Table of Contents FTP Configuration file Upgrade firmware Technical specifications Package Contents Hardware installation InstallationTo install in Ethernet Software installationAdd Password to prevent Unauthorized Access Initial Access to the Network CameraCheck Network Settings Authentication How to UseInstalling plug-in Main Screen with Camera View Primary user’s capabilitySnapshot Digital ZoomClient settings Page Re-connect Fine-tuning for Best Performance Administrator’s capabilityFor Best Real-time Video Images Page Opening accounts for new users Protect Network Camera by passwordsBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings Get IP address automatically & Use fixed IP address Network settingsNetwork type LAN & PPPoERtsp Streaming HttpUrl http//Network Camera/setup/network.html Wlan Configuration Tkip AES Page Ddns Access List Video orientation Video SettingsAudio and Video GeneralAudio settings Image Settings FTP Email & FTPUrl http//Network Camera/setup/mailftp.html Motion detection Send out the snapshot while motion detection Application settingsWeekly schedule Snapshot file name prefixMethod for sending snapshot Sequential operationPage Page System log Viewing system parameters Maintenance Status LED TroubleshootingReset and restore Method GET/POST URL commands of the Network CameraGet server parameter values Set server parameter values Length is the actual length of contentWhere parameter pair is parameter=value\r\n Yyyy/mm/dd WirelessNetwork CameraSkip to invoke default server Available parameters on the serverBlank Group Security255.255.255.0 192.168.0.99554 5556 Group Wireless restartDefault 55580.0 000000000000000000 Group IPFilterComputer 256640x480 For For 60Hz only 51200012200 AAC4 for computerGamr for mobile 128000To take effect Script.vssx 514 Application page CGI commandIP address Page Maxsize Capture single snapshotAccount management Privilege=conf System logsUpgrade firmware Configuration filePost data Networking Technical specificationsMPEG-4 AAC Technology MPEG-4 Visual Technology Technology License NoticeLiability Electromagnetic Compatibility EMC