Vivotek IP7137 manual Access List

Page 34

Access List

The access list is to control the access permission of clients by checking the client IP address.

There are two lists for permission control: Allow List and Deny List. Only those clients whose IP address is in the Allow List and not in the Deny List can connect to the Video Server or Network Camera for receiving the audio/video streaming.

Both Allow List and Deny List consist of a list of IP ranges. If you want to add a new IP address range, type the Start IP Address and End IP Address in the text boxes and click on the Add button. If you want to remove an existing IP address range, just select from the pull-down menu and click on the Delete button.

Both the Allow List and Deny List can have 20 entries.

<url> http://<Network Camera>/setup/accesslist.html

<Network Camera> is the domain name or original IP address of the Network Camera.

- 33 -

www.vivotek.com

Image 34
Contents Page Technical@vivotek.com Before You Use This Product Table of Contents FTP Configuration file Upgrade firmware Technical specifications Package Contents Installation Hardware installationSoftware installation To install in EthernetCheck Network Settings Initial Access to the Network CameraAdd Password to prevent Unauthorized Access How to Use AuthenticationInstalling plug-in Primary user’s capability Main Screen with Camera ViewDigital Zoom SnapshotClient settings Page Re-connect Administrator’s capability Fine-tuning for Best PerformanceFor Best Real-time Video Images Page Protect Network Camera by passwords Opening accounts for new usersBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings LAN & PPPoE Network settingsNetwork type Get IP address automatically & Use fixed IP addressHttp Rtsp StreamingUrl http//Network Camera/setup/network.html Wlan Configuration Tkip AES Page Ddns Access List General Video SettingsAudio and Video Video orientationAudio settings Image Settings Email & FTP FTPUrl http//Network Camera/setup/mailftp.html Motion detection Snapshot file name prefix Application settingsWeekly schedule Send out the snapshot while motion detectionSequential operation Method for sending snapshotPage Page System log Viewing system parameters Maintenance Reset and restore TroubleshootingStatus LED Get server parameter values URL commands of the Network CameraMethod GET/POST Length is the actual length of content Set server parameter valuesWhere parameter pair is parameter=value\r\n Available parameters on the server WirelessNetwork CameraSkip to invoke default server Yyyy/mm/ddGroup Security Blank192.168.0.99 255.255.255.0554 5558 Group Wireless restartDefault 5556Group IPFilter 000000000000000000 0.0640x480 For 256Computer 512000 For 60Hz only128000 AAC4 for computerGamr for mobile 12200To take effect Script.vssx IP address Application page CGI command514 Page Capture single snapshot MaxsizeAccount management System logs Privilege=confConfiguration file Upgrade firmwarePost data Technical specifications NetworkingTechnology License Notice MPEG-4 AAC Technology MPEG-4 Visual TechnologyElectromagnetic Compatibility EMC Liability