Vivotek PZ6114/PZ6124 manual 886-2-82455282 F

Page 12

The IP addresses shown in the "Current IP Address" field reflect those on the local network. They may be from the DHCP server. If there is no DHCP server, the camera will try to find a free IP address (this takes from 15 second to 3 minutes, depending on the LAN status). The method of finding IP address is seeking from 192.168.0.99, to 192.168.0.254. If any of the address inside this range is free, the Network Camera will be assigned to this IP address, and its subnet mask would be 255.255.255.0. If none of the addresses is free, the Network Camera will try the range from 192.168.0.2 to 192.168.0.98. After an IP address is assigned to the camera, the “Activity” status LED blinks.

The Vivotek’s new UPnP function will always assign an IP address for the Network Camera. The Administrator can click on button “Link to selected device” to connect the I.E. to the camera.

If the camera is not on the IP installer list, click on the “Search” button to search for the camera on the LAN.

- 8 -

www.vivotek.com

T:886-2-82455282 F: 886-2-82455532

Image 12

Contents Page Technical@vivotek.com Before You Use This Product Package Contents Table of Contents Definitions in Configuration Smtp FTPAppendix Hardware Installation To install in EthernetTo install in wireless LAN Software Installation 886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Initial Access to the Network Camera Installing Plug-inCheck Network Settings Add Password to Prevent Unauthorized AccessHow to Use AuthenticationConfiguration Primary User’s CapabilitiesMain Screen with Camera View Digital OutputCamera view Pan/tilt/zoom control buttonsCCD control buttons Zoom speedFocus speed Auto panClient Settings There are four settings for the client side886-2-82455282 F Administrator’s Capabilities Fine-tuning for Best PerformanceFor Best Real-time Video Images Somewhere Between Real-time and Clear Images Only Quality Images Will DoSelect for Motion Jpeg Protect Network Camera by Passwords Opening Accounts for New UsersDemo on Multiple Sites Mid-scale Service Product Demo for E-business Large-scale ServiceBuild a Multimedia Web Attraction Site More Flexible Options for ViewersIf the web space has FTP service If the web space has no FTP service Image URL Build a Security Application Send Snapshots When Motion is Detected Definitions in Configuration System Parameters User Group Administration 886-2-82455282 F Edit User Network Settings GeneralGet IP address automatically & Use fixed IP address Streaming Wireless耟 Tkip AES Url http//Network Camera/setup/wireless.html Ddns & UPnP 886-2-82455282 F Mail & FTP Smtp886-2-82455282 F 886-2-82455282 F Video Codec Parameters 886-2-82455282 F Image Settings CCD Settings886-2-82455282 F 886-2-82455282 F Audio 886-2-82455282 F Motion Detection Preset function area Camera ControlCamera control area 886-2-82455282 F Camera control area Preset function area Application Setup Weekly ScheduleEvent Operation Sequential Operation 886-2-82455282 F Factory Default Factory defaultViewing System Log Viewing System ParametersRemote Controller Troubleshooting Appendix886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Cleaning the Lens Pan/Tilt/Zoom Data URL Commands of the Network Camera OverviewStyle Convention General CGI URL Syntax and Parameters Get Server Parameter ValuesMethod GET/POST Set Server Parameter Values Parameter pairAvailable Parameters on the Server NosyncName Value Description Do1~4 Primary Smtp server, max 40 characters Group Wireless restart DefaultAuto ShortOpen 0000000000MPEG4 886-2-82455282 886-2-82455532 Restore Restore the last saved image parameters Save Ntsc & Cmos Group Upnp Auto iris Drive the Digital Output Query Status of the Digital InputCapture Single Snapshot Account Management System Logs Privilege=dido&privilege=listenConfiguration File Upload File firmwareCamera Control Recall Preset Locations System InformationMethod GET/POST Technical Specifications NetworkingTechnology License Notice MPEG-4 Visual TechnologyElectromagnetic Compatibility EMC Liability