Vivotek PZ6114/PZ6124 manual Hardware Installation, To install in Ethernet

Page 8

Installation

Hardware Installation

Please verify that your product package contains all the accessories listed in the foregoing Package Contents. Depending on the user’s application, an Ethernet cable may be needed. The Ethernet cable should meet the specs of UTP Category 5 and not exceed 100 meters in length.

Connect the power adapter jack to the Network Camera before plugging in to the power socket. This will reduce the risk of accidental electric shock.

Upon powering up, the device runs through a self-test procedure and the front LEDs will blink between green and red for a few times. If self-test passes, the LEDs will shut off and the Network Camera will be on stand-by and ready for software installation. If self-test fails the red LED will blink several times. Refer to Appendix A for troubleshooting.

The Network Camera will first detect Ethernet. If it does not connect to Ethernet, the Network Camera will try WLAN. During the searching and connecting process to the wireless access point or station, the red LED of the Network Camera will flash every second. Until the Network Camera is connected to the other wireless device, the red LED will become lighted. Operating in either network mode, the green LED will flash every second as heartbeat to indicate alive.

To install in Ethernet

Make sure the Ethernet is firmly connected to a switch hub. After attaching the Ethernet cable plug in the power adapter. If the LED turns out to be steady green after self-test, go to next paragraph “Software Installation”. If the Ethernet is not available, the Network Camera will switch to wireless LAN mode.

- 4 -

www.vivotek.com

T:886-2-82455282 F: 886-2-82455532

Image 8

Contents Page Technical@vivotek.com Before You Use This Product Package Contents Table of Contents Definitions in Configuration Smtp FTPAppendix Hardware Installation To install in EthernetTo install in wireless LAN Software Installation 886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Initial Access to the Network Camera Installing Plug-inCheck Network Settings Add Password to Prevent Unauthorized AccessHow to Use AuthenticationConfiguration Primary User’s CapabilitiesMain Screen with Camera View Digital OutputCamera view Pan/tilt/zoom control buttonsCCD control buttons Zoom speedFocus speed Auto panClient Settings There are four settings for the client side886-2-82455282 F For Best Real-time Video Images Administrator’s CapabilitiesFine-tuning for Best Performance Somewhere Between Real-time and Clear Images Only Quality Images Will DoSelect for Motion Jpeg Protect Network Camera by Passwords Opening Accounts for New UsersDemo on Multiple Sites Mid-scale Service Product Demo for E-business Large-scale ServiceBuild a Multimedia Web Attraction Site More Flexible Options for ViewersIf the web space has FTP service If the web space has no FTP service Image URL Build a Security Application Send Snapshots When Motion is Detected Definitions in Configuration System Parameters User Group Administration 886-2-82455282 F Edit User Get IP address automatically & Use fixed IP address Network SettingsGeneral Streaming Wireless耟 Tkip AES Url http//Network Camera/setup/wireless.html Ddns & UPnP 886-2-82455282 F Mail & FTP Smtp886-2-82455282 F 886-2-82455282 F Video Codec Parameters 886-2-82455282 F Image Settings CCD Settings886-2-82455282 F 886-2-82455282 F Audio 886-2-82455282 F Motion Detection Camera control area Preset function areaCamera Control 886-2-82455282 F Camera control area Preset function area Event Operation Application SetupWeekly Schedule Sequential Operation 886-2-82455282 F Factory Default Factory defaultViewing System Log Viewing System ParametersRemote Controller Troubleshooting Appendix886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Cleaning the Lens Pan/Tilt/Zoom Data Style Convention URL Commands of the Network CameraOverview Method GET/POST General CGI URL Syntax and ParametersGet Server Parameter Values Set Server Parameter Values Parameter pairAvailable Parameters on the Server NosyncName Value Description Do1~4 Primary Smtp server, max 40 characters Group Wireless restart DefaultAuto ShortOpen 0000000000MPEG4 886-2-82455282 886-2-82455532 Restore Restore the last saved image parameters Save Ntsc & Cmos Group Upnp Auto iris Drive the Digital Output Query Status of the Digital InputCapture Single Snapshot Account Management System Logs Privilege=dido&privilege=listenConfiguration File Upload File firmwareCamera Control Recall Preset Locations System InformationMethod GET/POST Technical Specifications NetworkingTechnology License Notice MPEG-4 Visual TechnologyElectromagnetic Compatibility EMC Liability