Vivotek PZ6114/PZ6124 manual Network Settings, General

Page 37

Network Settings

Any changes made on this page will need to restart the system in order to validate the

changes. Make sure every field is entered correctly before clicking on .

"Get IP address automatically" & “Use fixed IP address”

The default status is “Get IP address automatically”. This can be tedious having to perform software installation whenever the Network Camera starts. Therefore, once the network settings, especially the IP address, have been entered correctly, select “Use fixed IP address” then the Network Camera will skip installation at the next boot. The Network Camera can automatically restart and operate normally after a power outage. Users can run IP installer to check the IP address assigned to the Network Camera if the IP address is forgotten or using the UPnP function provided by the Network Camera (MS Windows XP provides UPnP function at My Network Place). As for how to get IP address automatically, please refer to the section of Software Installation.

General

“IP address” This is necessary for network identification.

“Subnet mask” It is used to determine if the destination is in the same subnet. The default value is “255.255.255.0”.

“Default router” This is the gateway used to forward frames to destinations in different subnet. Invalid router setting will fail the transmission to destinations in different subnet.

“Primary DNS” The primary domain name server that translates hostnames into IP addresses.

“Secondary DNS” The secondary domain name server that backups the Primary DNS.

HTTP

“HTTP port” This can be other than the default Port 80. Once the port is changed, the User must be notified the change for the connection to be successful. For instance,

- 33 -

www.vivotek.com

T:886-2-82455282 F: 886-2-82455532

Image 37

Contents Page Technical@vivotek.com Before You Use This Product Package Contents Table of Contents Smtp FTP Definitions in ConfigurationAppendix To install in Ethernet Hardware InstallationTo install in wireless LAN Software Installation 886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Installing Plug-in Initial Access to the Network CameraAdd Password to Prevent Unauthorized Access Check Network SettingsAuthentication How to UsePrimary User’s Capabilities ConfigurationMain Screen with Camera View Digital OutputPan/tilt/zoom control buttons Camera viewZoom speed CCD control buttonsFocus speed Auto panThere are four settings for the client side Client Settings886-2-82455282 F Fine-tuning for Best Performance Administrator’s CapabilitiesFor Best Real-time Video Images Only Quality Images Will Do Somewhere Between Real-time and Clear ImagesSelect for Motion Jpeg Opening Accounts for New Users Protect Network Camera by PasswordsProduct Demo for E-business Large-scale Service Demo on Multiple Sites Mid-scale ServiceBuild a Multimedia Web Attraction Site More Flexible Options for ViewersIf the web space has FTP service If the web space has no FTP service Image URL Build a Security Application Send Snapshots When Motion is Detected Definitions in Configuration System Parameters User Group Administration 886-2-82455282 F Edit User General Network SettingsGet IP address automatically & Use fixed IP address Streaming Wireless耟 Tkip AES Url http//Network Camera/setup/wireless.html Ddns & UPnP 886-2-82455282 F Smtp Mail & FTP886-2-82455282 F 886-2-82455282 F Video Codec Parameters 886-2-82455282 F CCD Settings Image Settings886-2-82455282 F 886-2-82455282 F Audio 886-2-82455282 F Motion Detection Camera Control Preset function areaCamera control area 886-2-82455282 F Camera control area Preset function area Weekly Schedule Application SetupEvent Operation Sequential Operation 886-2-82455282 F Factory default Factory DefaultViewing System Log Viewing System ParametersRemote Controller Appendix Troubleshooting886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Cleaning the Lens Pan/Tilt/Zoom Data Overview URL Commands of the Network CameraStyle Convention Get Server Parameter Values General CGI URL Syntax and ParametersMethod GET/POST Parameter pair Set Server Parameter ValuesNosync Available Parameters on the ServerName Value Description Do1~4 Primary Smtp server, max 40 characters Default Group Wireless restartShort AutoOpen 0000000000MPEG4 886-2-82455282 886-2-82455532 Restore Restore the last saved image parameters Save Ntsc & Cmos Group Upnp Auto iris Query Status of the Digital Input Drive the Digital OutputCapture Single Snapshot Account Management Privilege=dido&privilege=listen System LogsUpload File firmware Configuration FileCamera Control Recall System Information Preset LocationsMethod GET/POST Networking Technical SpecificationsMPEG-4 Visual Technology Technology License NoticeLiability Electromagnetic Compatibility EMC