Vivotek PZ6114/PZ6124 manual Wireless耟

Page 39

Wireless耟

“SSID” (Service Set Identifier), it is a name that identifies a wireless network. Access Points and wireless clients attempting to connect to a specific WLAN (Wireless Local Area Network) must use the same SSID. The default setting is default. Note: The maximum length of SSID is 32 single-byte characters and SSID can’t be any of “, <, > and space character.

“Wireless mode” Clicking on the pull-down menu to select from the following options:

▶“Infrastructure” Make the Network Camera connect to the WLAN via an Access Point. (The default setting)

▶“Ad-Hoc”Make the Network Camera connect directly to a host equipped with a

wireless adapter in a peer-to-peer environment.

“Channel” While in infrastructure mode, the channel is selected automatically to match the channel setting for the selected Access Point. In Ad-Hoc mode, the channel must be manually set to the same channel for each wireless adapter. The default channel setting depends on the installed region.

“TX rate” This field is for selecting the maximum transmission rate on the network. The default setting is “auto”, that is the Network Camera will try to connect to the other wireless device with highest transmitting rate.

“Security” Select the data encrypt method

▶“None” – No data encryption.

▶“WEP” – allows communication only with other devices with identical WEP settings.

▶“WPA-PSK”– Use WPA pre-shared key.

“Auth Mode” Choosing one of the following modes, (Open is the default setting).

▶“Open” – communicates the key across the network.

-35 -

www.vivotek.com

T:886-2-82455282 F: 886-2-82455532

Image 39

Contents Page Technical@vivotek.com Before You Use This Product Package Contents Table of Contents Smtp FTP Definitions in ConfigurationAppendix To install in Ethernet Hardware InstallationTo install in wireless LAN Software Installation 886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Installing Plug-in Initial Access to the Network CameraAdd Password to Prevent Unauthorized Access Check Network SettingsAuthentication How to UseDigital Output ConfigurationPrimary User’s Capabilities Main Screen with Camera ViewPan/tilt/zoom control buttons Camera viewAuto pan CCD control buttonsZoom speed Focus speedThere are four settings for the client side Client Settings886-2-82455282 F Administrator’s Capabilities Fine-tuning for Best PerformanceFor Best Real-time Video Images Only Quality Images Will Do Somewhere Between Real-time and Clear ImagesSelect for Motion Jpeg Opening Accounts for New Users Protect Network Camera by PasswordsMore Flexible Options for Viewers Demo on Multiple Sites Mid-scale ServiceProduct Demo for E-business Large-scale Service Build a Multimedia Web Attraction SiteIf the web space has FTP service If the web space has no FTP service Image URL Build a Security Application Send Snapshots When Motion is Detected Definitions in Configuration System Parameters User Group Administration 886-2-82455282 F Edit User Network Settings GeneralGet IP address automatically & Use fixed IP address Streaming Wireless耟 Tkip AES Url http//Network Camera/setup/wireless.html Ddns & UPnP 886-2-82455282 F Smtp Mail & FTP886-2-82455282 F 886-2-82455282 F Video Codec Parameters 886-2-82455282 F CCD Settings Image Settings886-2-82455282 F 886-2-82455282 F Audio 886-2-82455282 F Motion Detection Preset function area Camera ControlCamera control area 886-2-82455282 F Camera control area Preset function area Application Setup Weekly ScheduleEvent Operation Sequential Operation 886-2-82455282 F Viewing System Parameters Factory DefaultFactory default Viewing System LogRemote Controller Appendix Troubleshooting886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Cleaning the Lens Pan/Tilt/Zoom Data URL Commands of the Network Camera OverviewStyle Convention General CGI URL Syntax and Parameters Get Server Parameter ValuesMethod GET/POST Parameter pair Set Server Parameter ValuesNosync Available Parameters on the ServerName Value Description Do1~4 Primary Smtp server, max 40 characters Default Group Wireless restart0000000000 AutoShort OpenMPEG4 886-2-82455282 886-2-82455532 Restore Restore the last saved image parameters Save Ntsc & Cmos Group Upnp Auto iris Query Status of the Digital Input Drive the Digital OutputCapture Single Snapshot Account Management Privilege=dido&privilege=listen System LogsUpload File firmware Configuration FileCamera Control Recall System Information Preset LocationsMethod GET/POST Networking Technical SpecificationsMPEG-4 Visual Technology Technology License NoticeLiability Electromagnetic Compatibility EMC