AGFA DC-1030I Inserting the Memory Card, Insert the card, Tips, About Camera Memory, DCF Protocol

Page 12

Inserting the Memory Card

You can use SD Card with this digital camera. The memory card slot is located beneath the battery cover, adjacent to the battery compartment.

1 Open the battery cover.

ySlide the battery cover in the direction indicated by the arrow.

2 Insert the card.

yInsert the card with the label facing up and the arrow pointing in.

Tips

yTo remove the card, gently press on the edge of the card and release it. Pull the card out and close the battery cover.

3 Close the battery cover.

Caution

yIt may cause damage to the card if removed while the camera is on.

yDo not touch the connection terminals on the back side of the card.

About Camera Memory

This camera is equipped with internal memory. If the memory card is not inserted in the camera, all images and movie clips recorded by the camera will be stored in the internal memory. If the memory card is inserted, images and movie clips are stored on the memory card.

DCF Protocol

The DCF protocol defines the format for image file data as well as the directory structure for the memory card. Images that are taken by a DCF camera can be viewed on DCF-compatible cameras from other manufacturers.

6

Image 12
Contents Page Extending battery life DisclaimerPrecautions Iii „ FCC Compliance and AdvisoryContents Appendix Using This Menu Getting StartedScope of delivery Attaching the Wrist StrapParts of the Camera Page Low Battery Indicator About Battery TypeInserting the Batteries Inserting the Memory Card Insert the cardTips About Camera MemorySetting the Display Language / Date & Time Setting the Display LanguageSelect a language Press the Menu button to close the menuSetting the Date & Time Apply the settingSet date and time Using the LCD Monitor REC modePlayback mode Dpof„ REC mode „ Playback modeChanging the LCD Status Turning the Power On and Off Press the Power button n again to turn the power offPower Saving Function Basic OperationChanging the Mode Switching between REC mode and Playback modeSelecting the REC mode Set the camera to the REC mode Launch the mode paletteSelecting the ASM mode Set the camera to the REC modeLaunch the ASM mode Exit the ASM modeUsing the Menus Change the settingREC menu Select an itemSetup menu Open the Setup menuREC menu list Movie Press the Menu n button to close the menu Setup menu list BeepOff SecReset NtscPAL Computer / PrinterBasic Recording Recording Still ImagesHalf press the shutter button to focus the image Take a pictureUsing the Q mode Setting Image Size and Quality Resolution ValuesQuality Values Using the Zoom Function Using the Flash Using the Macro Using the Self-timer & Burst 10 secDouble BurstUsing the Aperture Priority Turn the power on, and set the camera toUsing the Shutter Priority Using the Manual Exposure Setting the Movie Size Recording Movie ClipsRecording Audio Clips Press the shutter button again to end recordingPlaying Back Audio Clips Recording a Voice Memo Open the Playback menuPress the SET button to start recording for 30 seconds Playing Back a Voice MemoSetting the Metering Setting the White BalanceOther Recording Functions Setting the ISO Setting the ExposureSetting the AEB Setting the HighlightSetting the Sharpness Setting the Photo EffectSetting Date Stamp Turn the power on, and set the camera to the Playback mode PlaybackPlaying Back Images Press the four-way control or nMagnifying & Trimming Still Images Magnify the imageTrim the image Save the imageChange the slide show settings Viewing in ThumbnailPlaying a Slide Show Playing the slide showPlayback mode Open the menu Deleting FilesDeleting a Single File Deleting Multiple Files Press or to select Select, and then press the SET buttonSelect multiple images Delete imagesProtecting a Single File Protecting All FilesPress or to select Lock all, and then press the SET button Press the SET button to protect all images Protecting Multiple FilesThumbnail screen Open the menu Protect imagesEditing Images Rotating Still ImagesPress the SET button to rotate the image Changing the Image SizeCopying the Files Changing the Image with EffectsSetting the Dpof Select Yes and then press the SET button to start copyOr to select Single, then press the SET button Print the date stamp outChoosing a Startup Image Connecting the Camera to a TV Making ConnectionsDisplay on TV Connecting the Camera to a PC Using the Card ReaderConnecting the Camera to a Computer with the USB Cable Software Installation System RequirementsInstalling the Software Install Ulead Photo Explorer 8 SE BasicInstall VideoStudio 7 SE VCD Utilities DriversInstalling the Software Driver Installing Ulead Photo Explorer 8 SE BasicFollow the on-screen instructions to install the drivers Drive. The autorun menu appearsInstalling VideoStudio 7 SE VCD Using the SoftwareUlead Photo Explorer 8 SE Basic Appendix About the Folder & File NameFolder Structure File NamingTroubleshooting Problem Cause SolutionSpecifications Ntsc / PALFunction Available List ModeCapture 0EV AEB Still Mode Using the PictBridge Print SettingSelect Images Resetting to Default Settings Starting PrintCustomer care Declaration of Conformity
Related manuals
Manual 74 pages 53.91 Kb