Canon MR-14EXl manual Wireless Manual Flash .~lj.I~III.I~.I~i.I~I.I~.H.·~~~~~

Wireless Manual Flash .~lj.I~•••III.I~.I~i.I~I.I~".H.·~~~~•••••~ ---

With all Type-B cameras, you can also set up a wireless manual flash system.

*To set up a wireless flash system, follow the same procedure for Type-A cameras on page 42 to 44.

*W"ireless autoflash is not possible.

Setting the flash output for flash tubes A and 8 and slave C

With IimiM A : B : C displayed on the master unit, set the flash output for flash tubes A and B. Then set the flash output for slave C. For the setting procedure, see "Firing Both Flash Tubes at a Different Output" on page 61.

__ With all Type-B cameras, C.Fn-5 can set the same flash output for flash tubes A and B and slave C. (~p.64)

•While IimiM is not displayed on the. master unit, you can just set the flash output with the master unit.

When C.Fn-5-1 is set, you can use additional Speedlites and set their slave IDs to A, B, or C. (~p.65)

Group C

By having multiple Speedlites set to the same slave ID, you can create a slave group to produce a brighter flash. For example, a slave unit whose slave ID is A will fire together with flash tube A. Each slave group is treated as one Speedlite, with the same flash settings applied to all the Speedlites in the group. There is no limit as to the number of slave units that can belong to one group.

Flash tube B Flash tube A

63