Canon HF S20, HF S21 manual To select the photo capture settings, Continue from the same menu

(_ NOTES

•A video snapshot scene can be captured only during playback; it can- not be captured during playback pause mode.

•The captured video snapshot scene is saved to the same memory that contains the source scene.

•Video snapshot scenes cannot be captured from any of the following types of scenes.

-Scenes shorter than 1 second

-Scenes that were edited using the supplied software ImageMixer 3 SE and were then written back to the camcorder.

•When the source scene is itself a video snapshot scene, you may not be able to capture a video snapshot scene depending on the length of the source scene and the length currently selected for video snapshot scenes.

•When you start capturing a video snapshot scene less than 1 second from the end of the scene, the video snapshot scene will be captured starting from the beginning of the following scene.

•During the playback of video snapshot scenes captured from a previ- ously recorded movie, you may notice some anomalies in the picture/ sound at the point where the playback switches to a new scene.

Capturing Photos

You can capture a single photo or a series of photos. The size of the captured photos will be [MW 1920x1080] and it cannot be changed, but you can select the photo quality.

Please read the IMPORTANT section ([_ 102) before using an Eye-Fi card.

Operating	modes:	1
To select the photo capture settings
[MENU]		[Ph0to capture from	video] _}
[rq	single	photo] or [D._j Ph0to sequence]	_} [_]

Continue from the same menu:

*The number displayed indicates the approximate number of photos that can be recorded with the current quality setting.

Video * 101