Canon HF S20, HF S21 manual Dynamic, Standard, D, Powered is

Options(*Default		value	in	mode)
[_	Dynamic]*	(	mode only) Compensates for a higher
	degree of camcorder shake, such as when shooting while walk-
	ing, and is more effective as the zoom approaches full wide
	angle.
[D	Standard], [D		On]	Compensates for a lower degree of
	camcorder shake, such as when shooting while remaining sta-
	tionary, and is suitable for shooting natural-looking scenes. Use
	this setting when recording movies with the optional Wide-con-
	verter or Tele-converter.
[_	Off] Use this		setting	when the camcorder is mounted on a tri-
	pod.

Powered IS

When shooting video, you can use Powered IS to make the image stabilization even more powerful. Powered IS is most effective when you are stationary and zooming n on far subjects using high zoom ratios (the more you approach the telephoto end). Holding the LCD panel with your left hand will add to the stability of the shot

Press and hold POWEREDIS as long as you want to activate Powered IS.

•_J appears in yellow, wme Powered IS is activated.

•YOU can cnan(

[POWEREDIS button ( ong press or

;oggle on/oft) with me _ @ [POWERED IS Button] setting.

(_) NOTES

•If the degree of camcorder shake is too high, the image stabilizer may not be able to fully compensate.

• Powered IS is not available in mode.

•For surveying and following shots, when you pan the camcorder from side to side or tilt it up and down, we recommend setting the IS mode to [_ Dynamic] or [_ Standard].

Video * 65