Pre-Rec0rding
The camcorder will start recording 3 seconds before you press iSTARTISTOP, ensuring you do not miss important shooting opportuni- ties. This is especially useful when it is difficult to predict when to start recording.
Operating modes:
1 Activate the
[FuNC:] _ [_ pre REC] _ [!'_11on] _ [x]
•_) appears.
•Repeat, selecting [1'_'Off], to turn off
2 Press sTARi:/sToP .
The scene recorded in the memory will start 3 seconds before [STAi_i_/ST6Pwas pressed.
(_ NOTES
•While
•The camcorder will not record the full 3 seconds prior to pressing
_TART/sTOP if the button was pressed within 3 seconds of having turned on
•Any of the following actions will deactivate the
-Leaving the camcorder without any operation for 5 minutes.
-Pressing
-Changing the position of the mode switch.
-Changing the camcorder's operating mode.
-Setting the camcorder to standby mode.
-Changing any of the setup menu settings or changing the following settings in the FUNC. panel: [Rec. Programs], [White Balance], [AGC Limit], [Digital Effect] or [Image Stabilizer].