Canon HF S20, HF S21 manual FuNCIi @ Menu @, Headph0nes Close the menu @

(_ NOTES

•When the audio level meter reaches the red point (0 dB), the sound may be distorted.

•If the audio level is too high and the sound gets distorted, activate the

microphone attenuator with the _ _ [Microphone Attenuator[ set- ting (or [Surround Mic Attenuator[ when the optional SM-V1 Surround Microphone is attached to the camcorder).

•We recommend using headphones to check the sound level while adjusting the audio recording level or when the microphone attenuator is activated.

•This function can also be assigned to the custom key/dial (CC189).

Using Headphones

Use headphones for playback or to check the audio level while record- ing. The headphones are connected to the AV OUT/O terminal, which is used for both the headphones and the audio/video output. Before connecting the headphones, follow the procedure below to change the function of the terminal from AV output to O (headphones) output.

Operating	modes:	_	1
* Headphones	can be used	also in	mode but the function of the terminal carl--

not be changed in this mode. Changethe setting in advancein one of the other operating modes.

h	[FuNCI]i		@} [MENU] @ _				_} [AV/HeadPh0nes]		@}
_	[Headph0nes]
		close the menu: @ [X]
	_}	[2D]	_}	[Volume] _}Drag			Y0Ur finger	left and right	along
	the	volurne		bar to	adjust	the	volume _}	[X]	....
* Only when performing the					procedure	in	mode,
•	O	appears.

Video * 85