Sherbourn Technologies Comprehensive Guide to the Features of ' Remote Control
Page 26

Overview of the PT-7010A Remote

•Fully backlit

•Pre-programmed for most brands of A/V equipment

•Learns commands from your other remote controls

•Macro feature lets you program a sequence of control steps

•Operates up to ten components

•Does not lose programming memory when changing batteries

Button Layout

Think of the Sherbourn PT-7010A remote control as ten remotes in one. There are ten DEVICE buttons (five on either side of the display) and each allows the remote to operate one piece of equipment. From the factory, the device buttons are labeled: CD, TAPE, AUX, ZONE2, 7010A, DVD, VCR, SAT, TV and CABLE.

Only the 7010A and ZONE2 buttons are pre-programmed, and these allow the remote to operate your PT-7010A. The remote can be set to operate your other remote controlled equipment.

This is done in three ways from the hidden SETUP menu:

1)Entering a code from the tables at the end of this manual

2)Stepping through the codes

3)Learning from your other remotes

See Remote Setup on page 31 for more details.

1 LCD Display

The top line shows the present device, mode or status, and it shows when a remote command is being transmitted. The bottom line shows the page number, status and basic instructions during programming.

The main part of the display shows the labels of the ten DEVICE buttons. You can change any label and customize the remote to fit your system. Note: this is not a touch- sensitive screen, just a way of labeling the device buttons on each side, and showing instructions and status.

2 Button and Display Light

The button on the right side of the remote briefly turns on the lights for the buttons and display. Pressing it again will turn it off. The duration of time the lights stay on is adjustable or the lights can be disabled.

Adjusting the LCD Contrast: The contrast of the display can be changed by holding down the MAIN button and pressing the Joystick Pad UP or DOWN.

3 DEVICE Buttons

Once you press a device button, all the device buttons change label and function to become buttons to operate your device. There are two pages per device, and you can move between them using the PAGE button.

4 PAGE Button

Use this to jump to various display pages. For example, if you press the 7010A device button, the display changes to show buttons which control your PT-7010A. If you press PAGE, the display will move to page 2, showing more functions for the PT-7010A

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents For Model PT-7010A Preamplifier/Processor/Tuner Table of Contents Troubleshooting Guide Settings MenusRemote Control Codes Favorite Settings LogSpecial ‘Thank You’ Safety Precautions Antenna Grounding Outside the House NEC National Electrical Code StandardsUnpacking the PT-7010A Recording the Serial NumberFeatures of the PT-7010A Pre/Pro/Tuner Volume Knob PT-7010A Front Panel FeaturesPower Button IR Receiver WindowTone Controls Signal Processing Indicator LightsAM/FM Tuner Controls Mute ButtonPT-7010A Rear Panel Layout XLR Audio Outputs FM AntennaRS-232 Port Main Audio OutputsConnection Tips for Superior Sound Installation and ConnectionsAC Power Considerations Connection Tips for Video Quality and Flexibility Option Analog Audio and Composite Video Connecting a DVD-Video PlayerConnection Diagram Digital Audio and Component Video Connecting to the TV or Projector using Component Video Connecting a VCR From the PT-7010A into the VCR’s inputsConnecting a CD Player Analog AudioConnecting a Cassette Tape or DAT Deck Connecting the 8-Channel Analog Inputs PossibleConnecting the AM and FM Antennas Connecting an Amplifier Main Zone for a 5.1 ConfigurationMain Zone for a 7.1 Configuration Connecting a Separate Amplifier for Zone Overview of the PT-7010A Remote Quick Start Instructions for PT-7010A Setup Quick Start Setup InstructionsAdding Batteries to the Remote Control Page Speakers Menu, select Speaker Position menu Turning on Zone Operation of the PT-7010A using the RemoteTurning on the Main Zone Programming and Configuring Your Components Macro Punch Recal Erase Edit Light CloneEdit Erase Recal RecallOn-Screen Display OSD Functions How to Navigate the OSD MenusOSD Menus Trim MenuModes Menu Tone MenuSaving AM/FM Presets Input Configuration Menus The example showsTuner Preset Menu Inputs MenuSettings Menus Speakers Menu Position Speakers Menu Calibration Crossover Adjustment Software Menu Special Features of the Sherbourn PT-7010A Surround Modes for 2 Channel Source MaterialSurround Modes for Multi-Channel Sources PartyTuner Operation Recording OperationZone 2 Operation IndicatorsZone 2 Adjust Recording to a VCRSpeaker Placement Tips Surround Back Speakers Subwoofer LocationRemote Control Codes Audio ComponentsCD Players Satellite/DSS Televisions VCRs Troubleshooting Guide Zone 2 Does Not Play Digital Inputs Reset ProcedureZone 2 Not Working External Amplifiers Shut Down Often or PrematurelyOther Probable Causes of Noise Problems Updating PT-7010A FirmwareHum Noises Main Zone Settings Favorite Settings LogTone Settings Zone 2 SettingsInput Settings and Remote Codes Control SettingsVideo Settings Speaker Settings Distance Feet Setting LG/SM/OFFTechnical Specifications Dolby Disclosure Software Upgrade Licensing and Trademark DisclosuresDTS Disclosure Apple DisclosureSherbournR Sherbourn

PT-7010A specifications

Sherbourn Technologies PT-7010A is an advanced multi-channel power amplifier that has made a significant mark in the audio engineering world. Renowned for its performance and versatility, the PT-7010A caters to both audiophiles and professionals seeking a high-quality audio solution.

One of the standout features of the PT-7010A is its impressive power output. Delivering 100 watts per channel into an 8-ohm load, the amplifier guarantees robust sound reproduction across a variety of audio formats. With the ability to drive both low and high impedance loads efficiently, it handles demanding speaker systems with ease, making it a suitable choice for home theaters as well as professional audio environments.

Another key characteristic of the PT-7010A is its use of Class A/B amplification technology, which combines the efficiency of Class B with the linearity of Class A. This results in a rich, warm sound with minimal distortion, ensuring that the audio signal remains clear even at high volume levels. Additionally, the amplifier features extensive thermal management, allowing it to maintain optimal performance without overheating, thus enhancing its lifespan.

The build quality of the Sherbourn PT-7010A is equally impressive. Constructed with high-grade materials, the amplifier not only ensures durability but also minimizes vibrations that can adversely affect sound quality. Its sleek design makes it an aesthetically pleasing addition to any audio setup, whether in a living room or a commercial venue.

Connectivity is another highlight of the PT-7010A, featuring multiple input options, including balanced XLR and unbalanced RCA connections. This versatility allows for seamless integration with a wide array of audio sources, ranging from home theater systems to professional recording equipment.

The amplifier's user-friendly interface simplifies operation, with easy access to power settings and a front-panel indicator to monitor status. Furthermore, the PT-7010A is designed to be environmentally friendly, with energy-efficient components that reduce power consumption without compromising performance.

In conclusion, Sherbourn Technologies PT-7010A stands out as a powerful and versatile amplifier that combines high performance with advanced technology. Its quality construction, exceptional sound reproduction, and variety of connection options make it an excellent choice for anyone looking to elevate their audio experience, whether in home entertainment systems or professional settings.
Top Page Image Contents