Unpacking the PT-7010A

Sherbourn Technologies NEC National Electrical Code Standards, Unpacking the PT-7010A

NEC (National Electrical Code) Standards

A Note for the Cable Television (CATV) Installer

This reminder is to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

Antenna Grounding Outside the House

If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the lead- in wire to an antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See diagram below.

Cable TV Coaxial Cable, Satellite Dish Cables, and Television Antennas should be grounded BEFORE the point of entry into the house.

The Sherbourn PT-7010APre/Pro/Tuner should reach you in flawless condition. If you notice any shipping damage or other issues upon unpacking the unit, please contact your Sherbourn Retailer immediately.

Gently lift out the unit and remove all the packing material and accessories. It is important to save all the packing materials and the box in case your Sherbourn PT-7010A ever needs to be moved or shipped back to the factory for service.

Make sure that you keep your sales receipt. It is the only way for Sherbourn to establish the duration of your Limited Warranty and it may be useful for insurance purposes.

Please take a moment to fill out and mail the Sherbourn Customer Response card.

Recording the Serial Number

Please read the serial number located on the rear panel and record it below. Also record the place where you purchased this product and the date of purchase.

Model Number ________PT-7010A___________

Serial Number ___________________________________

Place of Purchase _________________________________

Date of Purchase _________________________________

PT-7010A specifications

Sherbourn Technologies PT-7010A is an advanced multi-channel power amplifier that has made a significant mark in the audio engineering world. Renowned for its performance and versatility, the PT-7010A caters to both audiophiles and professionals seeking a high-quality audio solution.

One of the standout features of the PT-7010A is its impressive power output. Delivering 100 watts per channel into an 8-ohm load, the amplifier guarantees robust sound reproduction across a variety of audio formats. With the ability to drive both low and high impedance loads efficiently, it handles demanding speaker systems with ease, making it a suitable choice for home theaters as well as professional audio environments.

Another key characteristic of the PT-7010A is its use of Class A/B amplification technology, which combines the efficiency of Class B with the linearity of Class A. This results in a rich, warm sound with minimal distortion, ensuring that the audio signal remains clear even at high volume levels. Additionally, the amplifier features extensive thermal management, allowing it to maintain optimal performance without overheating, thus enhancing its lifespan.

The build quality of the Sherbourn PT-7010A is equally impressive. Constructed with high-grade materials, the amplifier not only ensures durability but also minimizes vibrations that can adversely affect sound quality. Its sleek design makes it an aesthetically pleasing addition to any audio setup, whether in a living room or a commercial venue.

Connectivity is another highlight of the PT-7010A, featuring multiple input options, including balanced XLR and unbalanced RCA connections. This versatility allows for seamless integration with a wide array of audio sources, ranging from home theater systems to professional recording equipment.

The amplifier's user-friendly interface simplifies operation, with easy access to power settings and a front-panel indicator to monitor status. Furthermore, the PT-7010A is designed to be environmentally friendly, with energy-efficient components that reduce power consumption without compromising performance.

In conclusion, Sherbourn Technologies PT-7010A stands out as a powerful and versatile amplifier that combines high performance with advanced technology. Its quality construction, exceptional sound reproduction, and variety of connection options make it an excellent choice for anyone looking to elevate their audio experience, whether in home entertainment systems or professional settings.