Sherbourn Technologies PT-7010A Inputs Menu, Input Configuration Menus The example shows

Page 36

INPUTS Menu

These menus let you select which input you would like to configure. Pressing the joystick right on each input brings up a second menu which allows you to configure what happens when each input is selected.

Input Configuration Menus (The example shows the

DVD menu)

NAME - Use the joystick up/down, and left/right to change the display name for any input, up to 9 characters. Move fully to the left after entering the name.

whenever the 8-Channel audio input is selected. Also, this input only works in the MAIN ZONE, not in ZONE 2.

GAIN TRIM - Use this to adjust all of your sources to play at similar levels. To prevent overloading, the levels can only be adjusted downwards. You should try and trim all the inputs to be the same average level as your quietest source.

DEFAULT MODE - Set the input to a favorite surround mode or stereo.

MAIN ZONE - Enable/disable the selected input in the Main Zone. You can set up your system so any unused inputs are not selectable. From the factory, the inputs are enabled. If you choose to disable an input, then it will not play in the Main Zone.

TRIGGER RELAY - The Trigger Relay can be set to turn on whenever the input is selected. This could be used to turn on an amplifier, video screen, lighting controls, etc.

ZONE 2 - Enable or disable the input for use in Zone 2. Sometimes this is a useful idea to implement when a simple selection is desired in the second zone (such as a patio, play room, garage, or bedroom).

Note: The 8-Channel input menu is different from the other menus as it allows you to select a specific video input

Tuner Preset Menu

This allows you to set the AM/FM band and frequency of up to 40 radio stations. They can be recalled quickly and set as favorite stations on the remote control. See page 44.

For FM stations, try to select the Stereo-NR (noise reduction) for the best reception.

Saving AM/FM Presets

Step 1) Once you are on a preset in the OSD, press the MODE button on the remote control to select the band from FM NR ON, FM NR OFF, or AM MONO.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents For Model PT-7010A Preamplifier/Processor/Tuner Table of Contents Settings Menus Remote Control CodesTroubleshooting Guide Favorite Settings LogSpecial ‘Thank You’ Safety Precautions NEC National Electrical Code Standards Unpacking the PT-7010AAntenna Grounding Outside the House Recording the Serial NumberFeatures of the PT-7010A Pre/Pro/Tuner PT-7010A Front Panel Features Power ButtonVolume Knob IR Receiver WindowSignal Processing Indicator Lights AM/FM Tuner ControlsTone Controls Mute ButtonPT-7010A Rear Panel Layout FM Antenna RS-232 PortXLR Audio Outputs Main Audio OutputsInstallation and Connections AC Power ConsiderationsConnection Tips for Superior Sound Connection Tips for Video Quality and Flexibility Option Connecting a DVD-Video Player Connection DiagramAnalog Audio and Composite Video Digital Audio and Component Video Connecting to the TV or Projector using Component Video Connecting a VCR From the PT-7010A into the VCR’s inputsConnecting a CD Player Analog AudioConnecting a Cassette Tape or DAT Deck Connecting the 8-Channel Analog Inputs PossibleConnecting the AM and FM Antennas Connecting an Amplifier Main Zone for a 5.1 ConfigurationMain Zone for a 7.1 Configuration Connecting a Separate Amplifier for Zone Overview of the PT-7010A Remote Quick Start Setup Instructions Adding Batteries to the Remote ControlQuick Start Instructions for PT-7010A Setup Page Speakers Menu, select Speaker Position menu Operation of the PT-7010A using the Remote Turning on the Main ZoneTurning on Zone Programming and Configuring Your Components Macro Punch Recal Erase Edit Light CloneEdit Erase Recal RecallHow to Navigate the OSD Menus OSD MenusOn-Screen Display OSD Functions Trim MenuModes Menu Tone MenuInput Configuration Menus The example shows Tuner Preset MenuSaving AM/FM Presets Inputs MenuSettings Menus Speakers Menu Position Speakers Menu Calibration Crossover Adjustment Software Menu Special Features of the Sherbourn PT-7010A Surround Modes for 2 Channel Source MaterialSurround Modes for Multi-Channel Sources PartyTuner Operation Recording OperationIndicators Zone 2 AdjustZone 2 Operation Recording to a VCRSpeaker Placement Tips Surround Back Speakers Subwoofer LocationRemote Control Codes Audio ComponentsCD Players Satellite/DSS Televisions VCRs Troubleshooting Guide Reset Procedure Zone 2 Not WorkingZone 2 Does Not Play Digital Inputs External Amplifiers Shut Down Often or PrematurelyProblems Updating PT-7010A Firmware Hum NoisesOther Probable Causes of Noise Favorite Settings Log Tone SettingsMain Zone Settings Zone 2 SettingsControl Settings Video SettingsInput Settings and Remote Codes Speaker Settings Distance Feet Setting LG/SM/OFFTechnical Specifications Software Upgrade Licensing and Trademark Disclosures DTS DisclosureDolby Disclosure Apple DisclosureSherbournR Sherbourn

PT-7010A specifications

Sherbourn Technologies PT-7010A is an advanced multi-channel power amplifier that has made a significant mark in the audio engineering world. Renowned for its performance and versatility, the PT-7010A caters to both audiophiles and professionals seeking a high-quality audio solution.

One of the standout features of the PT-7010A is its impressive power output. Delivering 100 watts per channel into an 8-ohm load, the amplifier guarantees robust sound reproduction across a variety of audio formats. With the ability to drive both low and high impedance loads efficiently, it handles demanding speaker systems with ease, making it a suitable choice for home theaters as well as professional audio environments.

Another key characteristic of the PT-7010A is its use of Class A/B amplification technology, which combines the efficiency of Class B with the linearity of Class A. This results in a rich, warm sound with minimal distortion, ensuring that the audio signal remains clear even at high volume levels. Additionally, the amplifier features extensive thermal management, allowing it to maintain optimal performance without overheating, thus enhancing its lifespan.

The build quality of the Sherbourn PT-7010A is equally impressive. Constructed with high-grade materials, the amplifier not only ensures durability but also minimizes vibrations that can adversely affect sound quality. Its sleek design makes it an aesthetically pleasing addition to any audio setup, whether in a living room or a commercial venue.

Connectivity is another highlight of the PT-7010A, featuring multiple input options, including balanced XLR and unbalanced RCA connections. This versatility allows for seamless integration with a wide array of audio sources, ranging from home theater systems to professional recording equipment.

The amplifier's user-friendly interface simplifies operation, with easy access to power settings and a front-panel indicator to monitor status. Furthermore, the PT-7010A is designed to be environmentally friendly, with energy-efficient components that reduce power consumption without compromising performance.

In conclusion, Sherbourn Technologies PT-7010A stands out as a powerful and versatile amplifier that combines high performance with advanced technology. Its quality construction, exceptional sound reproduction, and variety of connection options make it an excellent choice for anyone looking to elevate their audio experience, whether in home entertainment systems or professional settings.
Top Page Image Contents