PT-7010A Rear Panel Layout

Sherbourn Technologies owner manual PT-7010A Rear Panel Layout

1 Audio/Video Inputs

These audio, Component Video, Composite-Video

and S-Video inputs

connect to the outputs of your audio video

components. When these inputs are selected, the audio will be heard in your system and the

video will be seen on the TV screen. VID2 can be used for a second VCR.

2Audio/Video Outputs

MAIN

Connects to the inputs of a TV monitor, where the video of any selected input and the On Screen Display (OSD) can be viewed. The audio connections allow you to listen to any selected audio source through your

TV’s speakers.

VCR

Connects to the inputs of a VCR to allow recording.

VID2/MON2 Connects to the input of a second VCR for recording, or to a second TV. When

configured in the OSD for “VID2,” this output is muted whenever the VID2 input is selected. This prevents feedback; also there is no OSD then on this output. When configured for “MON2,” the output is always active, the same as the Main output.

Note: Analog audio signals are present at these L and R outputs even if a digital input has been selected. The output is a 2 channel down mix if the digital source has

more than 2 channels.

3 Component Video In These inputs connect to the component- video outputs of your DVD, SAT or other

video source (VID1) if they have this

advanced capability. When these inputs are selected, the PT-7010A will automatically route any video signals going into these jacks

to the component video outputs. Note that component video provides the best picture compared to composite or S-Video. The PT-7010A can also route HDTV signals.

4 Component Video Out

If your TV Monitor has component video inputs, connect them to these outputs. If you

select DVD, SAT or VID1, then any video signals going to the component inputs, will

pass through to your TV monitor. The PT-

7010A can also up convert any Composite Video or S- Video signals from the other inputs to Component Video.

5 Infrared (IR) Inputs

These are used in custom installations to control the Main Zone and Zone 2 from a remote location. The input accepts 1/ 8" mono mini-jacks from standard remote control IR equipment, such as those made by Xantech and other companies. The remote sensors can be in a different room, or in a preferred location in your main room.

6 Triggers and Relay

The relay switch is normally open, and it will close after a short delay, when selecting a source. This can be used in installations to trigger video screen deployment, or other custom purposes. The OSD INPUTS menu

PT-7010A specifications

Sherbourn Technologies PT-7010A is an advanced multi-channel power amplifier that has made a significant mark in the audio engineering world. Renowned for its performance and versatility, the PT-7010A caters to both audiophiles and professionals seeking a high-quality audio solution.

One of the standout features of the PT-7010A is its impressive power output. Delivering 100 watts per channel into an 8-ohm load, the amplifier guarantees robust sound reproduction across a variety of audio formats. With the ability to drive both low and high impedance loads efficiently, it handles demanding speaker systems with ease, making it a suitable choice for home theaters as well as professional audio environments.

Another key characteristic of the PT-7010A is its use of Class A/B amplification technology, which combines the efficiency of Class B with the linearity of Class A. This results in a rich, warm sound with minimal distortion, ensuring that the audio signal remains clear even at high volume levels. Additionally, the amplifier features extensive thermal management, allowing it to maintain optimal performance without overheating, thus enhancing its lifespan.

The build quality of the Sherbourn PT-7010A is equally impressive. Constructed with high-grade materials, the amplifier not only ensures durability but also minimizes vibrations that can adversely affect sound quality. Its sleek design makes it an aesthetically pleasing addition to any audio setup, whether in a living room or a commercial venue.

Connectivity is another highlight of the PT-7010A, featuring multiple input options, including balanced XLR and unbalanced RCA connections. This versatility allows for seamless integration with a wide array of audio sources, ranging from home theater systems to professional recording equipment.

The amplifier's user-friendly interface simplifies operation, with easy access to power settings and a front-panel indicator to monitor status. Furthermore, the PT-7010A is designed to be environmentally friendly, with energy-efficient components that reduce power consumption without compromising performance.

In conclusion, Sherbourn Technologies PT-7010A stands out as a powerful and versatile amplifier that combines high performance with advanced technology. Its quality construction, exceptional sound reproduction, and variety of connection options make it an excellent choice for anyone looking to elevate their audio experience, whether in home entertainment systems or professional settings.