Sherbourn Technologies PT-7010A owner manual AM/FM Tuner Controls, Tone Controls, Mute Button

Page 9

8 AM/FM Tuner Controls

The AM/FM button toggles between the AM or FM band. Press and hold it to scan of the station presets. Press it again or press a preset button to stop the scan.

DIRECT Tuner Controls

Press the DIRECT button, then the numbers for frequency tuning.

UP/DOWN Tuner Controls

Switch to stations above or below the frequency of the current station. If repeatedly pressed, the tuner will move up or down one frequency step each time. If held down for a second or more, the tuner will automatically keep tuning stations. Press UP or DOWN once again to stop when it reaches a station you like.

Preset Tuner Memory Buttons

Press just the numbers (do not press DIRECT) for tuning the memorized presets.

9 Tone Controls

To change the tone, first press BASS or TREBLE and then press UP or DOWN to suit your taste. The display will show the change in dB level for reference. The range for both BASS and TREBLE is +/-10 dB in steps of 1 dB. The unit returns to its normal display after a few moments of inactivity, and any level changes are retained. The BASS and TREBLE levels can also be adjusted using the OSD TONE Menu and the remote control.

Note: The Tone controls do not affect the LFE channel, or the 8-Channel analog input.

10 Signal Processing Indicator Lights

DOLBY DIGITAL

This light is on when a Dolby Digital signal is being decoded.

DTS

This light is on when a DTS signal is being decoded.

DOLBY PRO LOGIC llx

This light is on when the Dolby Pro Logic II or Pro Logic IIx mode is engaged.

DIGI

This light is on when a digital audio signal is being decoded.

11 MUTE Button

This turns off the sound. Press it again, or adjust the volume control to return to the previous volume level.

12 PANEL DIM Button

The front panel lights have four levels: bright, medium, low and off (low intensity display with all illumination off).

13 Additional Front Panel Lights

COM/RECV

This light pulses to verify front panel volume LEVEL or INPUT SELECTOR commands are being sensed, or that the remote control commands are being sensed.

ZONE TWO POWER

This light is on when Zone 2 is turned on.

ZONE TWO ADJUST

This light is on when Zone 2 is being adjusted.

SIDE AXIS

This light is on when the side-axis outputs are enabled.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents For Model PT-7010A Preamplifier/Processor/Tuner Table of Contents Remote Control Codes Settings MenusTroubleshooting Guide Favorite Settings LogSpecial ‘Thank You’ Safety Precautions Unpacking the PT-7010A NEC National Electrical Code StandardsAntenna Grounding Outside the House Recording the Serial NumberFeatures of the PT-7010A Pre/Pro/Tuner Power Button PT-7010A Front Panel FeaturesVolume Knob IR Receiver WindowAM/FM Tuner Controls Signal Processing Indicator LightsTone Controls Mute ButtonPT-7010A Rear Panel Layout RS-232 Port FM AntennaXLR Audio Outputs Main Audio OutputsInstallation and Connections AC Power ConsiderationsConnection Tips for Superior Sound Connection Tips for Video Quality and Flexibility Option Connecting a DVD-Video Player Connection DiagramAnalog Audio and Composite Video Digital Audio and Component Video Connecting to the TV or Projector using Component Video From the PT-7010A into the VCR’s inputs Connecting a VCRAnalog Audio Connecting a CD PlayerConnecting a Cassette Tape or DAT Deck Possible Connecting the 8-Channel Analog InputsConnecting the AM and FM Antennas Main Zone for a 5.1 Configuration Connecting an AmplifierMain Zone for a 7.1 Configuration Connecting a Separate Amplifier for Zone Overview of the PT-7010A Remote Quick Start Setup Instructions Adding Batteries to the Remote ControlQuick Start Instructions for PT-7010A Setup Page Speakers Menu, select Speaker Position menu Operation of the PT-7010A using the Remote Turning on the Main ZoneTurning on Zone Macro Punch Recal Erase Edit Light Clone Programming and Configuring Your ComponentsEdit Recal Recall EraseOSD Menus How to Navigate the OSD MenusOn-Screen Display OSD Functions Trim MenuTone Menu Modes MenuTuner Preset Menu Input Configuration Menus The example showsSaving AM/FM Presets Inputs MenuSettings Menus Speakers Menu Position Speakers Menu Calibration Crossover Adjustment Software Menu Surround Modes for 2 Channel Source Material Special Features of the Sherbourn PT-7010AParty Surround Modes for Multi-Channel SourcesRecording Operation Tuner OperationZone 2 Adjust IndicatorsZone 2 Operation Recording to a VCRSpeaker Placement Tips Subwoofer Location Surround Back SpeakersAudio Components Remote Control CodesCD Players Satellite/DSS Televisions VCRs Troubleshooting Guide Zone 2 Not Working Reset ProcedureZone 2 Does Not Play Digital Inputs External Amplifiers Shut Down Often or PrematurelyProblems Updating PT-7010A Firmware Hum NoisesOther Probable Causes of Noise Tone Settings Favorite Settings LogMain Zone Settings Zone 2 SettingsControl Settings Video SettingsInput Settings and Remote Codes Distance Feet Setting LG/SM/OFF Speaker SettingsTechnical Specifications DTS Disclosure Software Upgrade Licensing and Trademark DisclosuresDolby Disclosure Apple DisclosureSherbournR Sherbourn

PT-7010A specifications

Sherbourn Technologies PT-7010A is an advanced multi-channel power amplifier that has made a significant mark in the audio engineering world. Renowned for its performance and versatility, the PT-7010A caters to both audiophiles and professionals seeking a high-quality audio solution.

One of the standout features of the PT-7010A is its impressive power output. Delivering 100 watts per channel into an 8-ohm load, the amplifier guarantees robust sound reproduction across a variety of audio formats. With the ability to drive both low and high impedance loads efficiently, it handles demanding speaker systems with ease, making it a suitable choice for home theaters as well as professional audio environments.

Another key characteristic of the PT-7010A is its use of Class A/B amplification technology, which combines the efficiency of Class B with the linearity of Class A. This results in a rich, warm sound with minimal distortion, ensuring that the audio signal remains clear even at high volume levels. Additionally, the amplifier features extensive thermal management, allowing it to maintain optimal performance without overheating, thus enhancing its lifespan.

The build quality of the Sherbourn PT-7010A is equally impressive. Constructed with high-grade materials, the amplifier not only ensures durability but also minimizes vibrations that can adversely affect sound quality. Its sleek design makes it an aesthetically pleasing addition to any audio setup, whether in a living room or a commercial venue.

Connectivity is another highlight of the PT-7010A, featuring multiple input options, including balanced XLR and unbalanced RCA connections. This versatility allows for seamless integration with a wide array of audio sources, ranging from home theater systems to professional recording equipment.

The amplifier's user-friendly interface simplifies operation, with easy access to power settings and a front-panel indicator to monitor status. Furthermore, the PT-7010A is designed to be environmentally friendly, with energy-efficient components that reduce power consumption without compromising performance.

In conclusion, Sherbourn Technologies PT-7010A stands out as a powerful and versatile amplifier that combines high performance with advanced technology. Its quality construction, exceptional sound reproduction, and variety of connection options make it an excellent choice for anyone looking to elevate their audio experience, whether in home entertainment systems or professional settings.
Top Page Image Contents