Canon T50 manual Hints, Checking the Batteries, Battery Life

Page 10

Hints:

1.Wipe the battery terminals and the camera contacts with a clean, dry cloth before loading to ensure proper contact.

2.When shooting in temperatures below 0°C (32°F), keep your camera and spare batteries close to your body or in a pocket until you are ready to take a picture. Although batteries may not function well in low temperatures, do not throw them away. They may work perfectly again once they are restored to room temperature.

3.Remove the batteries if you do not expect to use the camera for about three weeks or longer.

4. Checking the Batteries

If you hear beeping sounds, you can start taking pictures. If the beeping sounds are not emitted, battery power is insufficient. In this case, replace the batteries. (The selector dial automatically returns to "L" when you remove your finger.)

Rotate the selector dial to "B.C."

Battery Life

Figures = shooting in normal temperatures (20°C, or 68°F)

10

Distributed by WWW.LENSINC.NET

Image 10
Contents Page Page Page Page Table of Contents Attaching the Lens Page Setting the Lens for Programmed AE Loading the Batteries Hints Battery LifeChecking the Batteries Selector Dial Setting the Film Speed Loading the Film Page Loading the Film in Low or Humid Temperatures Learning to Hold the Camera CorrectlyShooting Page Continuous Shooting T50s Viewfinder Focusing Aids Viewfinder Information Self-Timer HintRewinding the Film Dedicated Flash Photography with the Canon Speedlite 244T 244T should only De used with the T50Page Photography with the Remote Switch Other Accessories Lens HoodCanon Wireless Controller LC-1 Interval Timer TM-1 Quartz Carrying the Camera Caring for Your Camera Page Specifications