Canon T50 manual

Page 25

Depress the shutter button halfway; once the " ! " mark signals that the flash is charged, you are ready for flash photography.

You need not make any settings. The aperture is automatically set for the best exposure results. The shutter speed is also set au- tomatically to X-sync (1/60 sec).

If the subject is too far from the flash, the green "P" will blink rapidly to warn you. Move closer to your subject in such cases.

When using "A" series Speedlites and the 533G or 577G with the T50, the shutter speed is set automatically to X- sync (1 /60 sec), and the aperture is adjusted au- tomatically to the aperture value of the flash as soon as the pilot lamp glows.

25

It is recommended to use a Canon flash unit on the T50. Using a flash or flash accessory of another make may cause the camera to work improperly or even possibly damage the - camera itself.

Distributed by WWW.LENSINC.NET

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Page Page Page Page Table of Contents Attaching the Lens Page Setting the Lens for Programmed AE Loading the Batteries Hints Battery LifeChecking the Batteries Selector Dial Setting the Film Speed Loading the Film Page Learning to Hold the Camera Correctly Loading the Film in Low or Humid TemperaturesShooting Page Continuous Shooting T50s Viewfinder Focusing Aids Viewfinder Information Hint Self-TimerRewinding the Film 244T should only De used with the T50 Dedicated Flash Photography with the Canon Speedlite 244TPage Photography with the Remote Switch Lens Hood Other AccessoriesCanon Wireless Controller LC-1 Interval Timer TM-1 Quartz Carrying the Camera Caring for Your Camera Page Specifications
Top Page Image Contents