Canon T50 manual

Page 7

To mount the lens, first align the red positioning point on the lens with the red dot above the camera mount as illustrated.

After mounting the lens, make sure the lens release button has popped out. Otherwise, the lens will not work properly. DO NOT press the lens release button while mounting, or it may not pop out.

Then turn the lens in the direction

To dismount the lens, turn the lens

of the arrow until it stops and the

in the direction of the arrow while

lens release button pops out with a

pressing the lens release button.

click.

 

Be sure to place the lens with its front end down (as illustrated) to avoid damaging the protruding pins

7

Distributed by WWW.LENSINC.NET

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Page Page Page Page Table of Contents Attaching the Lens Page Setting the Lens for Programmed AE Loading the Batteries Hints Battery LifeChecking the Batteries Selector Dial Setting the Film Speed Loading the Film Page Learning to Hold the Camera Correctly Loading the Film in Low or Humid TemperaturesShooting Page Continuous Shooting T50s Viewfinder Focusing Aids Viewfinder Information Hint Self-TimerRewinding the Film 244T should only De used with the T50 Dedicated Flash Photography with the Canon Speedlite 244TPage Photography with the Remote Switch Lens Hood Other AccessoriesCanon Wireless Controller LC-1 Interval Timer TM-1 Quartz Carrying the Camera Caring for Your Camera Page Specifications
Top Page Image Contents