Canon T50 manual Loading the Film

Page 13

7. Loading the Film

Pull up the rewind knob until the back cover pops open.

The T50 uses color or black and white film (negative or slide) in standard 35 mm cartridges. Place the cartridge in the film chamber as shown. Then push the rewind knob down, turning it until it drops into its normal posi- tion.

Pull the film leader across the camera so that its tip is aligned with the orange index in the lower right-hand side of the film chamber. If the film leader ex- tends past the orange line, manually wind the excess film back into the film cartridge. Make sure the film perforations are engaged with the sprocket teeth, then close the back cover.

Too much film slack.

13

Shield the film from direct sunlight while loading it.

Distributed by WWW.LENSINC.NET

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Page Page Page Page Table of Contents Attaching the Lens Page Setting the Lens for Programmed AE Loading the Batteries Hints Battery LifeChecking the Batteries Selector Dial Setting the Film Speed Loading the Film Page Learning to Hold the Camera Correctly Loading the Film in Low or Humid TemperaturesShooting Page Continuous Shooting T50s Viewfinder Focusing Aids Viewfinder Information Hint Self-TimerRewinding the Film 244T should only De used with the T50 Dedicated Flash Photography with the Canon Speedlite 244TPage Photography with the Remote Switch Lens Hood Other AccessoriesCanon Wireless Controller LC-1 Interval Timer TM-1 Quartz Carrying the Camera Caring for Your Camera Page Specifications
Top Page Image Contents