Canon T50 manual Setting the Lens for Programmed AE

Page 8

2. Setting the Lens for Programmed AE

Remove the front lens cap

While pressing in the AE lock pin,

 

 

turn the aperture ring in the

 

direction of the arrow until "A"

 

click-stops at the distance index.

8

"A" will be in line with the red dot on the camera. If you forget to do this, automatic exposure will be impossible. Since programmed AE requires this setting, be sure to always check that the lens is set at "A"

Note:

I f you disengage the aperture ring f r o m the "A" mark, the camera's shutter speed will remain set at 1/60 sec. At the same time, a red "M" will appear in the viewfinder when you depress the shutter button halfway.

Distributed by WWW.LENSINC.NET

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Page Page Page Page Table of Contents Attaching the Lens Page Setting the Lens for Programmed AE Loading the Batteries Checking the Batteries Battery LifeHints Selector Dial Setting the Film Speed Loading the Film Page Loading the Film in Low or Humid Temperatures Learning to Hold the Camera CorrectlyShooting Page Continuous Shooting T50s Viewfinder Focusing Aids Viewfinder Information Self-Timer HintRewinding the Film Dedicated Flash Photography with the Canon Speedlite 244T 244T should only De used with the T50Page Photography with the Remote Switch Other Accessories Lens HoodCanon Wireless Controller LC-1 Interval Timer TM-1 Quartz Carrying the Camera Caring for Your Camera Page Specifications
Top Page Image Contents