Madrigal Imaging N38 manual

Page 2

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO

NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Marking by the “CE” symbol (shown left) indicates compliance of this device with the EMC (Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of the European Community.

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna;

Increase the separation between the equipment and the receiver;

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

Image 2
Contents Operating Manual Madrigal Audio Laboratories, IncPage Important Safety Instructions Page Table of Contents Page Unpacking and Placement Operating Voltage Turn OFF Your Associated Components Turn on Your Source Component Turn on Your Power AmplifierQuick Start… Front panel Mode IndicatorsMode Button Display Intensity ButtonMono Button Inverted Polarity IndicatorOutput Level Source Selector ButtonsRear panel Balanced Main OutputsRecord Outputs SINGLE-ENDED Main OutputsBalanced Inputs 1 Slave and Master Communicator Ports External IR Input Remote Control Set-up and Installation VCR Not UsedDAT CASPress and Hold the Mode Button AGAIN… If Your Alias MAY Require AN INPUT…Store Your Selection Decide Which Source has the Highest Output Press and Hold the Mode Button on the Front PanelRaise the Volume to Match Your Reference Select the Input Whose Level YOU would Like to Automate P O R T a N T Press and Hold the Mute ButtonAdjust the Volume Knob to Your Preferred Setting Press and Hold the Mute Button AgainStandby Timer Time-outs in the Nº38 Operational Modes Page Using Surround Sound Processors Main Front Power Amplifier Ground Isolation Adaptor Linked Functions Care and maintenance Canadian Warranty Obtaining Service Specifications FAXDimensions Page Madrigal Audio Laboratories