Madrigal Imaging N38 manual Select the Input Whose Level YOU would Like to Automate

Page 22

Programming an Automatic Output Level

currently chosen input, and “2.8” indicates the current offset for that input.

6PRESS AND HOLD THE MODE BUTTON AGAIN… until the display reads NEW DATA, as below.

This indicates that your new Input Offset has been stored in non- volatile memory. As a result, this new setting will survive power outages and other interruptions in AC power to the preamp. You may wish to repeat this process in order to refine your settings.

The Nº38 also features the ability to remember a “preferred” output level setting, to which it will return whenever you select a particular input. This capability is a great convenience when used with tuners, for example, since their output level is often more consistent than other sources, and since tuners may be used primarily for background (rather than critical) listening. This adjustment may be made for each input independently of any other input.

In order to take advantage of this Automatic Output Level setting, follow the steps below:

1SELECT THE INPUT WHOSE LEVEL YOU WOULD LIKE TO “AUTOMATE”

2ADJUST THE VOLUME TO YOUR PREFERRED LEVEL This will be the preferred, programmed level.

3PRESS AND HOLD THE MODE BUTTON ON THE FRONT PANEL

Hold the Mode button until the display reads “SET DATA,” as below:

4TURN THE VOLUME KNOB COUNTER-CLOCKWISE FROM 0.0 UNTIL THE DISPLAY READS “AUTO”

The display will initially look like the illustration below:

When the volume knob is rotated counter-clockwise, the display will change to resemble the illustration shown at the top of the next page.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Operating Manual Madrigal Audio Laboratories, IncPage Important Safety Instructions Page Table of Contents Page Unpacking and Placement Operating Voltage Quick Start… Turn on Your Source Component Turn on Your Power AmplifierTurn OFF Your Associated Components Front panel Mode IndicatorsMode Button Display Intensity ButtonMono Button Inverted Polarity IndicatorOutput Level Source Selector ButtonsRear panel Balanced Main OutputsBalanced Inputs 1 SINGLE-ENDED Main OutputsRecord Outputs Slave and Master Communicator Ports External IR Input Remote Control Set-up and Installation VCR Not UsedDAT CASPress and Hold the Mode Button AGAIN… If Your Alias MAY Require AN INPUT…Store Your Selection Raise the Volume to Match Your Reference Press and Hold the Mode Button on the Front PanelDecide Which Source has the Highest Output Select the Input Whose Level YOU would Like to Automate P O R T a N T Press and Hold the Mute ButtonAdjust the Volume Knob to Your Preferred Setting Press and Hold the Mute Button AgainStandby Timer Time-outs in the Nº38 Operational Modes Page Using Surround Sound Processors Main Front Power Amplifier Ground Isolation Adaptor Linked Functions Care and maintenance Canadian Warranty Obtaining Service Specifications FAXDimensions Page Madrigal Audio Laboratories
Top Page Image Contents