Madrigal Imaging N38 manual Specifications, Fax

Page 35

Specifications

The correlation between published specifications and sonic quality is unreliable. A list of numbers reveals virtually nothing. All technical measurements must be subject to qualitative as well as quantitative interpretation.

Measurements of the Nº38 yield excellent results by any standards. However, only those specifications that apply to its actual operation are included here.

■ Power consumption:

40W maximum

Mains voltage: 100V, 120V, 200V, 220V, or 240VAC @ 50/60Hz

■ Overall dimensions:

See “Dimensions”

■ Shipping weight:

35 lbs. (16 kg)

■ Inputs:

2 stereo balanced (Swiss XLR female)

 

4 stereo single-ended (Madrigal RCA female)

1 Mark Levinson Link communications connector

118" mini-jack for external IR repeater

Outputs:2 stereo record outputs (Madrigal RCA female) 1 stereo balanced main out (Swiss XLR male)

1 stereo single-ended main out (Madrigal RCA female) 1 Mark Levinson Link communications connector

Gain:

■ Gain range:

-72.1 dB to +18.9 dB

Gain resolution: 0.1 dB steps above 38.8 in display (-34 dB), gradually increasing step size at lower levels

■ Input overload:

greater than 16V (0 dB output)

■ Input impedance:

100kshunted by 680pF

■ Output impedance:

less than 6

■ Maximum output (MAIN outputs):

16V rms, balanced

For more information, see your Mark Levinson dealer, or contact:

Madrigal Audio Laboratories, Inc.

P.O. Box 781

2081 South Main Street (Route 17)

Middletown, Connecticut 06457 USA

Telephone (860)

346-0896

FAX

(860)

346-1540

Madrigal provides an owner-transferable, five year limited warranty on all Mark Levinson products within the U. S. and Canada ONLY. Warranty and service policies outside the U. S. and Canada are set by the local, authorized

distributor and are applicable in the country of purchase ONLY. Madrigal products are designed to operate at set voltages appropriate for the country of sale and may be damaged if operated at the wrong voltage.

35

Image 35
Contents Madrigal Audio Laboratories, Inc Operating ManualPage Important Safety Instructions Page Table of Contents Page Unpacking and Placement Operating Voltage Turn OFF Your Associated Components Turn on Your Source Component Turn on Your Power AmplifierQuick Start… Display Intensity Button Mode IndicatorsMode Button Front panelSource Selector Buttons Inverted Polarity IndicatorOutput Level Mono ButtonBalanced Main Outputs Rear panelRecord Outputs SINGLE-ENDED Main OutputsBalanced Inputs 1 Slave and Master Communicator Ports External IR Input Remote Control Set-up and Installation CAS Not UsedDAT VCRIf Your Alias MAY Require AN INPUT… Press and Hold the Mode Button AGAIN…Store Your Selection Decide Which Source has the Highest Output Press and Hold the Mode Button on the Front PanelRaise the Volume to Match Your Reference Select the Input Whose Level YOU would Like to Automate Press and Hold the Mute Button P O R T a N TPress and Hold the Mute Button Again Adjust the Volume Knob to Your Preferred SettingStandby Timer Time-outs in the Nº38 Operational Modes Page Using Surround Sound Processors Main Front Power Amplifier Ground Isolation Adaptor Linked Functions Care and maintenance Canadian Warranty Obtaining Service FAX SpecificationsDimensions Page Madrigal Audio Laboratories