Step 2: Charging the battery pack
POWER switch
Battery pack
DC IN jack
DC plug
AC Adaptor
CHG lamp
To the
wall outlet
Power cord
Getting Started
You can charge the “InfoLITHIUM” battery pack (H series) after attaching it to your camcorder.
•Your camcorder operates only with an “InfoLITHIUM” battery pack (H series).
1 Attach the battery pack by sliding it in the direction of the arrow until it clicks.
2 Turn the POWER switch in the direction of the arrow to OFF (CHG) (The default setting).
3 Connect the AC Adaptor to the DC IN jack on the Handycam Station.
Be sure that the v mark on the DC plug is facing up.
4 Connect the power cord to the AC Adaptor and the wall outlet.
5 Set the camcorder onto the Handycam Station securely.
The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off when the battery pack is fully charged. Remove the camcorder from the Handycam Station.
To remove the battery pack
Turn the POWER switch to OFF (CHG). Slide the BATT (battery) release lever and remove the battery pack.
BATT (battery) release lever
•When you remove the battery pack or the AC Adaptor, make sure that the 
(Movie) lamp/
(Still) lamp (p.13) is turned off.
11