Sony SR300, SR82, SR62, SR200, DCR-SR42 manual Input/Output connectors, General

Page 37

DCR-SR200/SR300

1.5lx (lux) (when [AUTO SLW SHUTTR] is set to [ON], Shutter speed 1/30 second)

0 lx (lux) (during NightShot function)

*1 “Exif” is a file format for still images, established by the JEITA (Japan Electronics and Information Technology Industries Association). Files in this format can have additional information such as your camcorder’s setting information at the time of recording.

*2 The unique pixel array of Sony’s ClearVid CMOS Sensor and image processing system (new Enhanced Imaging Processor) allows still image resolution equivalent to the sizes described.

*3 In 16:9 mode, the focal length figures are actual figures resulting from wide angle pixel readout.

•Manufactured under license from Dolby Laboratories.

Input/Output connectors

Audio/Video output 10-pin connector

Video signal: 1 Vp-p, 75 Ω (ohms)

Luminance signal: 1 Vp-p, 75 Ω (ohms)

Chrominance signal: 0.286 Vp-p, 75 Ω (ohms)

Audio signal: 327 mV (at load impedance

47 kΩ (kilohms)), Output impedance less than

2.2 kΩ (kilohms)

USB output jack

mini-B

REMOTE jack (except for DCR-SR42)

Stereo mini-minijack (Ø 2.5 mm)

LCD screen

Picture

DCR-SR42

6.2 cm (2.5 type)

DCR-SR62/SR82/SR200/SR300

6.9 cm (2.7 type, aspect ratio 16:9)

Total number of pixels

DCR-SR42/SR62/SR82

123 200 (560 ⋅ 220)

DCR-SR200/SR300

211 200 (960 ⋅ 220)

General

Power requirements

6.8V/7.2 V (battery pack)

8.4V (AC Adaptor)

Average power consumption

During camera recording with normal brightness.

DCR-SR42

2.6 W

DCR-SR62/SR82 3.0 W

DCR-SR200 3.7 W

DCR-SR300 4.3 W

Operating temperature

0°C to + 40°C (32°F to 104°F)

Storage temperature

-20°C to + 60°C (-4°F to + 140°F)

Dimensions (Approx.)

DCR-SR42/SR62/SR82

73 × 72 × 109 mm (2 7/8 × 2 7/8 × 4 3/8 in.) (w×h×d) including the projecting parts

73 × 72 × 115 mm (2 7/8 × 2 7/8 × 4 5/8 in.) (w×h×d) including the projecting parts with supplied battery pack NP-FH40 attached

DCR-SR200/SR300

76 × 78 × 128 mm (3 × 3 1/8 × 5 1/8 in.) (w×h×d) including the projecting parts

76 × 78 × 149 mm (3 × 3 1/8 × 5 7/8 in.) (w×h×d) including the projecting parts with supplied battery pack NP-FH60 attached

Mass (Approx.)

DCR-SR42

335 g (11 oz) main unit only

380 g (13 oz) including the NP-FH40 rechargeable battery pack

DCR-SR62

350 g (12 oz) main unit only

395 g (14 oz) including the NP-FH40 rechargeable battery pack

DCR-SR82

360 g (12 oz) main unit only

405 g (14 oz) including the NP-FH40 rechargeable battery pack

DCR-SR200

455 g (1 lb) main unit only

535 g (1 lb 2 oz) including the NP-FH60 rechargeable battery pack

DCR-SR300

480 g (1 lb 1 oz) main unit only

560 g (1 lb 3 oz) including the NP-FH60 rechargeable battery pack

Supplied accessories

See page 9.

Additional Information

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Operating Guide Use Service InstallationFor customers in the U.S.A. Read this firstFor customers in the U.S.A Owner’s RecordFor the State of California, USA only Battery pack About language setting When the camcorder is connected to a computerOn recording Save all your recorded image dataTable of Contents Getting Started Checking supplied itemsTo change the battery of the Remote Commander Using the Remote Commander for the first timeOn the Remote Commander except for DCR-SR42 To remove the battery pack Charging the battery packTo charge the battery pack using only the AC Adaptor Available running time for the supplied battery packChanging the language setting Turning the power on, and setting the date and timeTo reset the date and time Turn the Power switch to turn on your camcorder Adjust the LCD panelPreparing for recording Fasten the grip belt and hold your camcorder correctlyTurn the Power switch until the respective lamp lights up Slide the lens cover switch to open DCR-SR42/SR62/SR82Recording Recording/Playback Start recordingInserting/ejecting a Memory Stick Duo To record still images on a Memory Stick DuoTo change the recording media Still images On Easy Handycam operationRecording/Playback Start playback PlaybackTouch the tab, and the movie to be played back Touch the , or tab, and the still image to be played backTo adjust the sound volume of movies Nightshot Plus switch*1 Power zoom leverParts and functions used for the camcorder RecordingPlayback Connecting to other devicesConnect with the USB cable Ws Disc Burn button Wd USB jackIndicators displayed during recording/playback Upper left Indicators when you made changesUpper right CenterSaving images Saving images using a computerDeleting images Deleting the images on the hard diskPlaying the image on a Performing with a computer Installing the supplied softwareViewing If the screen does not appear Installing softwareFollow the on-screen instructions to install the software Using the Home MenuItems of the Home Menu Camera category Using the Option MenuView Images category Others categoryItems of the Option Menu Settings categoryTab Troubleshooting Cor E ssss Self-diagnosis display C04ss Self-diagnosis display/Warning indicatorsC13ss / C32ss E20ss / E31ss / E61ss E62ss / E91ss / E94ssHigh temperature warning Slow flashing Battery level warning Slow flashingLow temperature warning Fast flashing Fast flashingWhen not using your camcorder for a long time PrecautionsTo clean the LCD screen On use and careProcedures SpecificationsAbout care and storage of the lens SystemColor temperature General Input/Output connectorsAC Adaptor AC-L200/L200B Rechargeable battery pack NP-FH40 DCR-SR42/SR62/SR82NP-FH60 DCR-SR200/SR300 On trademarks
Top Page Image Contents