(Warning on the hard disk of the camcorder)*
Fast flashing
•An error may have occurred with the hard disk drive in your camcorder.
(Warning on the hard disk of the camcorder)*
Fast flashing
•The hard disk of the camcorder is fully recorded.
•An error may have occurred with the hard disk drive in your camcorder.
E(Battery level warning)
Slow flashing
•The battery pack is nearly used up.
•Depending on the operating environment or battery conditions, E may flash, even if there are approximately 20 minutes remaining.
(High temperature warning)
Slow flashing
•The temperature of your camcorder is getting higher. Turn off your camcorder and leave it for a while in a cool place.
Fast flashing*
•The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place.
(Low temperature warning)*
Fast flashing
•The temperature of your camcorder is extremely low. Make the camcorder warm.
(Warning indicator pertaining to “Memory Stick Duo”)
•No “Memory Stick Duo” is inserted (p.16).
(Warning indicators pertaining to “Memory Stick Duo” formatting)*
•The “Memory Stick Duo” is damaged.
•The “Memory Stick Duo” is not formatted correctly.
(Warning indicator pertaining to incompatible “Memory Stick Duo”)*
•An incompatible “Memory Stick Duo” is inserted.
- (Warning indicator pertaining to the
•The
•Access to the “Memory Stick Duo” was restricted on another device.
(Warning indicator pertaining to the flash)
Fast flashing
• There is something wrong with the flash.
(Warning indicator pertaining to
•The amount of lights is not sufficient, so
•The camcorder is unsteady, so camera- shake easily occurs. Hold the camcorder steady with both hands and record the image. However, note that the camera- shake warning indicator does not disappear.
*You hear a melody when the warning indicators appear on the screen.
Troubleshooting
33