To charge the battery pack using only the AC Adaptor
Turn the POWER switch to OFF (CHG), then connect the AC Adaptor directly to the DC IN jack on the camcorder.
POWER
switch 
DC plug |
DC IN jack
Open the jack cover
Available running time for the supplied battery pack
Charging time:
Approximate time (min.) required when you fully charge a completely exhausted battery pack.
Recording/Playback time:
Approximate time (min.) available when you use a fully charged battery pack.
NP-FH40: (Unit:min.)
|
| ||
|
| SR82 | |
|
|
| |
| Charging time | 125 | 125 |
|
|
|
|
| Recording time*1 |
|
|
| Continuous | 105 | 90*2 |
| recording time | 100*3 | |
| Typical | 50 | 45*2 |
| recording time*4 | 50*3 | |
|
| ||
| Playback time | 120 | 110*2 |
|
| (Unit:min.) | |
|
|
| |
|
| ||
|
|
|
|
| Charging time | 135 | 135 |
|
|
|
|
| Recording time*1 |
|
|
| Continuous | 115*2 | 95*2 |
| recording time | 120*3 | 100*3 |
| Typical | 55*2 | 45*2 |
| recording time*4 | 60*3 | 50*3 |
| Playback time*2 | 165 | 160 |
*1 When [REC MODE] is set to [SP]. *2 When the LCD backlight turns on. *3When the LCD backlight turns off.
*4 Typical recording time shows the time when you repeat recording start/stop, turning the power on/ off and zooming.
On the battery pack
•Before changing the battery pack, turn the
POWER switch to OFF (CHG) and turn off the 
(Movie) lamp/
(Still) lamp (p.13).
•The power will not be supplied from the battery as long as the AC Adaptor is connected to the DC IN jack of your camcorder or the Handycam Station, even when the powercord is disconnected from the wall outlet.
On the charging/recording/playback time
•Times measured when using the camcorder at 25°C (77°F) (10°C to 30°C (50°F to 86°F) is recommended).
•The available recording and playback time will be shorter when you use your camcorder in low temperatures.
•The available recording and playback time will be shorter depending on the conditions under which you use your camcorder.
On the AC Adaptor
•Use the nearby wall outlet when using the AC Adaptor. Disconnect the AC Adaptor from the wall outlet immediately if any malfunction occurs while using your camcorder.
•Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.
•Do not
•Even if your camcorder is turned off, AC power (house current) is still supplied to it while connected to the wall outlet via the AC Adaptor.
12