SECTION 4
ASSEMBLY OF MECHANISM DECK
Note: Follow the assembly procedure in the numerical order given.
HOUSING
5 Fit projection on C part.
2Install the hanger onto two claws of the housing.
4Fit claw on B part.
3Put the housing under A part.
housing
C part
Apart
B part
7 Hold the hanger by bending the claw.
1 Install the catch to the hanger.
hanger
6 Fit projection on D part.
8Hold the hanger by bending the claw.
D part
ARM (SUCTION)
2 Move the arm (suction) in the arrow direction and fit on projection.
projection
1 Fit the arm (suction) on the shaft.
12