EN33
Flash Shooting
There are four flash modes:
Auto | : This setting automatically flashes when shooting under dark conditions. |
Forced on | : Select this setting to force the flash. |
: Select this setting to minimize the | |
| flash. The flash is forced to light. |
Off | : Select this setting to disable the flash even when shooting under dark conditions. |
| Note that in order to prevent blurry photos a tripod should be used with this |
| setting, since the shutter speed is slower. |
2 3,4
1
SET
4
OFF
M
V
1
2
Turn the Power dial to “A” or “M”.
•Hold the Lock button down while turning the Power dial.
Press the Flash button and select the flash mode.
•The “” indicator appears on the LCD panel.
•Press the Flash button repeatedly to cycle through the following modes:
“Off” → “ | (auto)” → “ (forced on)” |
→“
“Off”, charging starts and the flash standby lamp (red) flashes. When the flash standby lamp remains lit steadily, charging is complete.
3 Point the lens at the subject, position yourself, and
4 Press the Shutter button all the way to take the picture.
•The flash lights and the flash standby lamp (red) begins flashing.
•In
NOTES:
●Though the image on the LCD screen may appear dark, there is no problem with the recorded image.
●When the flash is turned on, the iris value is set to F2.8/3.8 automatically.
●When shooting with the flash, it is not possible to set the iris and exposure manually.
●Do not press the Shutter button while the flash is being charged.