JVC GC-QX5HD, GC-QX3HD manual Changing the Zoom Power While Shooting, Turn the Power dial to M

EN41

Changing the Zoom Power While Shooting

Depending on the image size, it is possible to enlarge a subject without sacrificing the current image quality. Because the zoom power cannot be changed in some instances if the image is large, reduce the image size (☞ pg. 28) before changing the zoom power.

3,6 4,5 7,8

7

1

SET	4	OFF
		M
		V

2

CAMERA SETTING

FRAME	1024X768
QUALITY	FINE
Q. REVIEW	ON
W. BALANCE	AUTO
SENS.	80
TELEPHOTO	2X
M. DRIVE	OFF
AF/AE	MULTI
CLEAR	EXE

1 Turn the Power dial to “M”.

•Hold the Lock button down while turning the Power dial.

2 Select “MANUAL” with the MODE switch. •“MANUAL” appears on the LCD panel.

3 Press the DISPLAY button until the CAMERA SETTING screen appears.

4 Press the r t button to select “TELEPHOTO”.

5	Press the w e button to select “2X” or “3.2X”.
	•It is not possible to turn off the LCD screen.
	•The zoom powers that can be selected
	depend on the image size.
	•When frame size is set to 2032 x 1536 only
	1X telephoto is available.
	1024 x	768: 1X/2X
	640 x	480: 1X/2X/3.2X

6 Press the DISPLAY button to turn off the menu screen.

7 Point the lens at the subject, position yourself, and half-press the Shutter button.

•The camera will continue to focus on the subject while the button is half-pressed. The shoot standby lamp (green) flashes.

8 Press the Shutter button all the way to take the picture.