JVC GC-QX3HD manual 50 EN, Shooting Film Film Copy Mode GC-QX5HD only

50EN

MANUALSHOOTING(cont.)

Shooting Film (Film Copy Mode) (GC-QX5HD only)

You can use the film copying adapter (provided; see page 49) to take photos of images already on film.

4 5 3 2

1

SET	4	OFF
		M
		V

FILM COPY SETTING

FRAME	2032x1536
QUALITY	FINE
Q. REVIEW	ON
FILM	NEGA FILM
PRO STILL	6M PRO S
W. BALANCE	AUTO
SENS.	80
CLEAR	EXE

				PRO STILL:
	Turn the Power dial to “M”.
				Selects the photography mode.
1 •Hold the Lock button down while turning the
				W. BALANCE:
		Power dial.
				Sets the white balance in accordance with
2
	Select “FILM” with the MODE switch.			the film.
	•“FILM” appears on the LCD panel.			SENS.:
				Selects the film sensitivity.
	Use the ZOOM lever to adjust the size of the
				CLEAR:
3 subject.
				Returns to the default settings.
	•The camera automatically enters macro
				Set the light source behind the film copying
		mode and the zoom range is restricted.
	•Move the film holder left or right as needed		6 adapter.
		to adjust the image.		•If using a fluorescent light (20 – 40 W) as
				backlighting, set it about 10 – 20 cm
	Press the DISPLAY button until the FILM
				(4" – 8") behind the film.
4 COPY SETTING screen appears.
				•If using natural light (40 – 100 W) as

		backlighting, set it about 20 – 30 cm
Press the r t w e button to select the film
		(8" – 12") behind the film.
5 copy setting.
		•Be careful when using hot light sources for
•Press the r t w e button repeatedly to cycle
		long periods of time. Heat can easily damage
	through the following modes:
		film and picture quality.
	FRAME:
	Selects the size of the picture.
	QUALITY:
	Selects the picture quality.
	Q. REVIEW:
	Selects whether to display the photographed
	picture on the LCD.
	FILM:
	Selects either negative or positive.