QUICKSTART
EN5
Power cord
Power outlet
Power lamp
AC adapter
DC input connector | DC cord |
Knob
Memory card cover
Memory card (3.3V type)
Connect the Camera to a Power Outlet. (☞ pg. 20)
1 Open the connector cover on the rear of the camera.
2 Connect the DC cord to the DC input connector.
3 Connect the DC cord to the DC input connector on the AC adapter.
4 Connect the power cord to a power outlet. •The power lamp on the charger lights.
Insert the Memory card. (☞ pg. 22)
1 |
| Open the Memory card cover. |
| •Slide the knob to the open position. | |
2 |
|
|
| Insert the Memory card. | |
| •Insert the card so that the contact surface is | |
|
| facing up and the notch on the card is on the |
|
| right. |
|
| •Turn power dial to “OFF” before inserting or |
|
| removing a Memory Card. |
3 |
|
|
| Close the Memory card cover. | |
| •Slide the knob to the close position. |