78EN
SOFTWARE SECTION FOR Macintosh®
Operating Environment | USB Connection |
The host computer that runs the Macintosh® operating environment must satisfy the following conditions.
USB Driver
1.
2.Mac OS 8.5.1/Mac OS 8.6/Mac OS 9.0
JVC Video Decoder
1.Power PC 603e/120MHz or faster
2.Mac OS 7.6.1 or later
3.QuickTime 3.0 or later
4.Minimum RAM requirement: 32MB
5.Minimum hard disk space requirement: 1MB
*Macintosh® is a registered trademark of Apple Computer.
*Other trademarks are property of their respective owners.
*If you use Macintosh® which does not have a USB port, use an optional flash path, conversion card adapter, etc. For details on the operating environ- ment of these devices, contact the dealers or manufacturers.
NOTE:
●Additional information regarding setup and information not contained in the instruction manual can be found in the file readme.txt. Please read this file before installing the accompanying software.
USB cable
(provided) DIGITAL
Digital output connector
To USB connector
Macintosh®
NOTES:
●Make sure to use the provided AC adapter (AA- V37) to power the camera, when using camera connected to a personal computer.
●When connecting the provided USB cable, make sure to confirm the shape of the plug.
●When connecting the camera to a personal computer via a USB cable, the personal computer is sometimes unable to recognize the device that is connected. Therefore, first turn both the camera and the personal computer on, and then connect the USB cable.