JVC GR-DV700, GR-DV900 instruction manual 22 EN, If using a VCR, go to step

22 EN VIDEO PLAYBACK (cont.)

Connections To A TV Or VCR

Connector

Cover****

Connector	To S
Cover****
	To AV
Audio/Video
cable	S-Video cable
(provided)	(optional)

1 2 3 4

1Make sure all units are turned off.

2Connect the camcorder to a TV or VCR as shown in the illustration.

If using a VCR, go to step 3.

If not, go to step 4.

3Connect the VCR output to the TV input, referring to your VCR’s instruction manual.

4Turn on the camcorder, the VCR and the TV.

5Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

To choose whether or not the following displays appear on the connected TV…

● Date/Time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.

( pg. 31, 40)

Or, press DISPLAY on the remote control to turn

on/off the date indication.

● Time Code

Set “TIME CODE” to “ON” or “OFF”.

( pg. 31, 40)

VCR

AWhite to AUDIO L IN*

BRed to AUDIO R IN*

CYellow to VIDEO IN**

DTo S-VIDEO IN***

TV

● Indications other than date/time and time code

Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.

( pg. 31, 40)

NOTES:

● It is recommended to use the AC Adapter as the

power supply instead of the battery pack.

( pg. 11)

● To monitor the picture and sound from the

camcorder without inserting a tape or memory

card, set the camcorder’s Power Switch to “A” or

*Not required for watching still images only.

**Connect when your TV/VCR has only A/V input connectors.

***Connect when your TV/VCR has S-VIDEO IN and A/V input connectors. In this case, it is not necessary to connect the yellow video cable.

****When connecting the cable, open the cover.

“M”, then set your TV to the appropriate input

mode.

● Make sure you adjust the TV sound volume to its

minimum level to avoid a sudden burst of sound

when the camcorder is turned on.

● If you have a TV or speakers that are not specially

shielded, do not place the speakers adjacent to the

TV as interference will occur in the camcorder

playback picture.

● When a cable is connected to the AV or

headphone connector, sound cannot be heard

from the speaker.