JVC GR-DV900 Protecting Files, To Remove Protection, To protect the currently displayed file

			EN 27
Protecting Files	To protect the currently displayed file
	9 Rotate the MENU Wheel
The Protect mode helps prevent the accidental	to select “CURRENT”, and	PROTECT	MENU
	press it. The PROTECT		CURRENT
erasure of files.			PROT . ALL
	screen appears.		CANC . ALL
			RETURN
MENU Wheel	10 Press 3 or 5 to
Power Switch	select the desired file.
Lock Button	11 Rotate the MENU	PROTECT
	Wheel to select
Rewind Button (3)
	“EXECUTE”, and press it.
VIDEO/MEMORY Switch	● To cancel protection,	PROTECTED
	select “RETURN”.	RETURN
	● Repeat steps 10 and 11
	for all files you want to
	protect.
	To protect all files stored in the memory
	card
	9 Rotate the MENU Wheel to select “PROT.ALL”,
	and press it. The PROTECT screen appears.
SELECT Button	10 Rotate the MENU Wheel to select “EXECUTE”,
	and press it.
Fast-Forward Button (5)
	● To cancel protection, select “RETURN”.
1 Load a memory card. ( pg. 16)	NOTES:
2 Set the VIDEO/MEMORY Switch to “MEMORY”.	● If the “ ” mark appears, the currently displayed
3 Set the Power Switch to “PLAY” while pressing	file is protected.
	● When the memory card is initialised or corrupted,
down the Lock Button located on the switch.
	even protected files are deleted. If you do not want
4 Open the LCD monitor fully, or pull out the
	to lose important files, transfer them to a PC and
viewfinder fully.	save them.

●The type of file (IMAGE, E-MAIL CLIP or TITLE)

which has been played back at the last time is	To Remove Protection
displayed.

RECORDING & PLAYBACK

If you want to select another type of file, go to step 5.

If not, go to step 7.

5Press SELECT. The MEMORY SELECT screen appears.

6Rotate the MENU Wheel to select the desired type of file, and press it.

7Press the MENU Wheel in. The Menu Screen appears.

8Rotate the MENU Wheel

to select “PROTECT”, and	MENU
	PROTECT
press it. The Sub Menu	DELETE
	DPOF
appears.	NO . RESET
	FORMAT
	D I SPLAY
	BR I GHT
	END

Before doing the following, perform steps 1 – 8 in “Protecting Files” in the left column.

To remove protection from the currently displayed file

9Rotate the MENU Wheel to select “CURRENT”, and press it. The PROTECT screen appears.

10Press 3 or 5 to select the desired file.

11Rotate the MENU Wheel to select “EXECUTE”, and press it.

●To cancel selection, select “RETURN”.

●Repeat steps 10 and 11 for all files you want to remove protection.

DIGITAL STILL CAMERA (D.S.C.)

CONTINUED ON NEXT PAGE