JVC GR-DV700 How To Use The Audio Cable, How To Attach The Core Filter for optional S-Video cable

6 EN

How To Use The Audio Cable

When using optional headphones or external microphone, connect to the provided Audio cable (with a core filter attached), then connect the Audio cable to the camcorder. The core filter reduces interference.

Stereo microphone

Stereo headphones

How To Attach The Core Filter (for optional S-Video cable)

Attach the core filter to an optional S-Video cable. The core filter reduces interference.

1Release the stoppers on both ends of the core filter.

Stopper

2Run the cable through the core filter, leaving approx. 3 cm of cable between the cable plug and the core filter. Wind the cable twice around the outside of the core filter as shown in the illustration.

● Wind the cable so that it is not slack.

Audio cable	3 cm
(provided)
	Wind twice.
Open the	3 Close the core filter until it clicks shut.
connector cover.
To MIC
Core filter
To	NOTES:
(headphones)
	● If the core filter cannot be attached to the S-Video
	cable you have, use the optional YTU94146B
	S-Video cable. Consult your nearest JVC dealer for
	details on its availability.
	● Take care not to damage the cable.
	● When connecting a cable, attach the end with the
	core filter to the camcorder.