JVC GR-DV900, GR-DV700 instruction manual Advanced features, Press Back Light

					EN 67
Advanced features
	SYMPTOM		POSSIBLE CAUSES		CORRECTIVE ACTION
13.	The focus does not adjust	13.	•Focus is set to the Manual	13.	•Set Focus to the Auto mode.
	automatically.		mode.		( pg. 43)
			•The recording was done in a		•Clean the lens and check the
			dark place, or the contrast		focus again. ( pg. 73)
			was low.
			•The lens is dirty or covered
			with condensation.
14.	In the 5-Second mode,	14.	•The 5-Second mode is set to	14.	•Set “5S” to “5S” in MANUAL
	recording ends before		“Anim.” in MANUAL Menu.		Menu. ( pg. 31, 35)
	5 seconds have elapsed.
15.	Snapshot mode cannot be	15.	•The Squeeze mode	15.	•Disengage the Squeeze
	used.		(SQUEEZE) is selected.		(SQUEEZE) mode.
					( pg. 31, 36)
16.	The colour of Snapshot looks	16.	•The light source or the	16.	•Find a white subject and
	strange.		subject does not include		compose your shot so that it
			white. Or there are various		also appears in the frame.
			different light sources behind		( pg. 23, 41)
			the subject.		•Disengage the Sepia (SEPIA)
			•The Sepia (SEPIA) or		and Monotone
			Monotone (MONOTONE)		(MONOTONE). ( pg. 31,
			mode is activated.		33)
17.	The image taken using	17.	•Shooting was performed	17.	•Press BACK LIGHT.
	Snapshot is too dark.		under backlit conditions.		( pg. 45)
18.	The image taken using	18.	•The subject is too bright.	18.	•Set “r” to “SPOTLIGHT”.
	Snapshot is too bright.				( pg. 33)
19.	White Balance cannot be	19.	•The Sepia (SEPIA) or	19.	•Disengage the Sepia (SEPIA)
	activated.		Monotone (MONOTONE)		or Monotone (MONOTONE)
			mode is activated.		mode before setting White
					Balance. ( pg. 33)
20.	Wipe/Fader effects do not	20.	•The Power Switch is set to	20.	•Set the Power Switch to “M”.
	work.		“A”.		( pg. 13)
						REFERENCES
22.	Program AE with special	22.	•The Power Switch is set to	22.	•Set the Power Switch to “M”.
21.	The Black & White Fader does	21.	•The Sepia (SEPIA) or	21.	•Disengage the Sepia (SEPIA)
	not work.		Monotone (MONOTONE)		and Monotone
			mode is activated.		(MONOTONE).
					( pg. 31, 33)
	effects does not work.		“A”.		( pg. 13)
23.	The image looks like the	23.	•When shooting in the dark,	23.	•If you want the lighting to
	shutter speed is too slow.		the unit becomes highly		look more natural, set “GAIN
			sensitive to light when		UP” to “AGC” or “OFF”.
			“GAIN UP” is set to		( pg. 31, 35)
			“AUTO”.