JVC GR-DV900, GR-DV700 instruction manual Tape To a Memory Card

				EN 53
Dubbing Still Images Recorded On		1	Load a cassette. ( pg. 15)
		2	Load a memory card. ( pg. 16)
A Tape To A Memory Card		3	Set the VIDEO/MEMORY Switch to “VIDEO”.
Still images can be dubbed from a tape to a memory		4	Set the Power Switch to “PLAY” while pressing
			down the Lock Button located on the switch.
card.		5	Set “	COPY” to “ON”. ( pg. 31, 39)
MENU Wheel		6	Press 4/9 to start playback.
SNAPSHOT Button		7	At the point you want to dub, press 4/9 again to
		8	engage Still Playback.
			To dub the image, press SNAPSHOT.
			● The ”	” indication appears during
			dubbing.
			● The selected image is stored in the memory
			card.
		NOTES:
		● If SNAPSHOT is pressed in step 8 when a memory
Power Switch		card is not loaded, the message “COPYING
		FAILED” is displayed.
Lock Button		● If an image recorded on the tape using “WIDE
VIDEO/MEMORY		MODE” ( pg. 36) is dubbed to a memory card,
	Play/Pause Button	the WIDE mode identifying signal is not dubbed
Switch	(4/9)	with it.
		● To use Playback Special effects with a video image
		you wish to dub, perform up to step 8 using the
		remote control (provided). ( pg. 56)
		● Images are dubbed in 640 x 480 pixels.

ADVANCED FEATURES