JVC GR-D90, GR-D70 For Playback Menu, Video, Clock ADJ, Quality , Image Size, REC Select

Page 31

CLOCK ADJ.

Allows you to set the current date and time ( pg. 10).

DSC (GR-D90/D70 only)

 

 

DSC

 

 

 

QUAL I TY

 

–

F I NE

I MAGE S I ZE

–

1024X768

REC SELECT –

 

 

 

RETURN

QUALITY , IMAGE SIZE

Refer to “Picture Quality/Image Size Setting” ( pg. 11).

REC SELECT

[ ]: When Snapshot recording is performed with the VIDEO/DSC Switch 4 set to “VIDEO”, still images are recorded only onto the tape.

/ : When Snapshot recording is performed with the VIDEO/DSC Switch 4 set to “VIDEO”, still images are recorded not only onto the tape but also on the memory card (640 x 480 pixels). In this mode, the “SNAP MODE” selection in the CAMERA Menu is also applicable to memory card recording.

For Playback Menu

1 Set the VIDEO/DSC Switch 4 to “VIDEO” (GR-D90/ D70 only), then set the Power Switch y to “PLAY” while pressing down the Lock Button t located on the switch.

2 Press the MENU/VOLUME wheel % in. The Menu Screen appears.

3 Rotate the MENU/VOLUME wheel % to select the desired function menu, and press it.

4 Rotate the MENU/VOLUME wheel % to select the desired function, and press it to display the Sub Menu.

5 Rotate the MENU/VOLUME wheel % to select the desired parameter and press it. Selection is complete.

6 Rotate the MENU/VOLUME wheel % to select

“ RETURN” and press it twice to close the Menu Screen.

VIDEO

V I DEO

SOUND MODE

–

STEREO

12B I T MODE

–

SOUND 1

REC MODE

–

OF F

 

 

 

COPY

–

 

S / AV I NPUT – OF F

 

RETURN

 

 

........  pg. 32, “Playback Sound”.

SOUND MODE

 

 

 

........  pg. 32, “Display”.

12BIT MODE

 

REC MODE

Allows you to set the tape recording mode ([SP] or LP) depending on your preference ( pg. 10).

It is recommended you use “REC MODE” in the

“ VIDEO” Menu when using this camcorder as a recorder during dubbing ( pg. 33, 34).

•“REC MODE” can be set when the Power Switch y is set to “PLAY” or “ ” ( pg. 10, 28).

COPY (GR-D90/D70 only)

ON: Enables dubbing of images recorded on a tape to a memory card ( pg. 21).

[OFF]: Enables snapshots to be taken during tape playback.

S/AV INPUT (GR-D90/D70 only)

ON: Enables audio/video signal input from the AV and S-VIDEO connectors ( pg. 33).

[OFF]: Enables audio/video signal output to a TV, VCR, etc. via the AV and S-VIDEO connectors ( pg. 16, 33).

•When “S/AV INPUT” is set to “ON”, camcorder playback cannot be viewed on the AV output.

SYSTEM

SYSTEM

BEEP

–

MELODY

TALLY

–

ON

REMOTE

–

ON

DEMO MODE

–

ON

PR I OR I TY

–

LCD

CAM RESET

 

 

RETURN

Each setting is linked with “ SYSTEM”, which appears when the Power Switch y is set to “ ” ( pg. 30).

The parameters are the same as in the description on pg. 30.

[ ] = Factory-preset

EN

USING MENUS FOR DETAILED ADJUSTMENT 31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents GR-D90 GR-D70 GR-D30 Contents Safety Precautions Before recording an important scene Important Product Safety InstructionsMake sure the arrow is Pointing upward Core FilterWind once StopperSub Menu Using AC Power PowerCharging the Battery Pack Using the Battery PackAbout Batteries Grip AdjustmentViewfinder Adjustment Lithium-ion is vulnerable in colder temperaturesLoading/Unloading a Cassette Approximate recording time Tape Recording modeShoulder Strap Attachment Tripod MountingScreen closes Date/Time SettingsRecording Mode Setting RETURN, and press it twice. The Menu Screen closesDisplay Loading a Memory Card Picture Quality/Image Size SettingTo Unload a Memory Card Label Clipped edge Memory cardBasic Recording To Adjust The Brightness Of The DisplayTape Recording Self-Recording Operation ModePower-Linked Operation Journalistic ShootingRecording from the Middle of a Tape To Control The Speaker VolumeTime Code Normal PlaybackPress To cancel Blank Search midwayBlank Search Press Blank SearchConnections If using a VCR . . . go to step If not . . . go to stepDate/Time Set DATE/TIME to AUTO, on or OFF To Protect Valuable Files available only for SD Memory Card Basic Shooting SnapshotTo Delete Unwanted Still Images To Remove The Shutter SoundEN Memory Card Recording Approximate Number of Storable ImagesMultiMediaCard To Magnify The Stored ImagesRemoving On-Screen Display Auto PlaybackViewing File Information Index PlaybackProtecting Files Deleting Files EN Advanced FeaturesTo Remove Protection To Print ALL Still Images ONE Print for Each Setting Print Information Dpof SettingAdvanced Features EN Dubbing Still Images Recorded On a Tape To a Memory CardFolder and File names To Reset The No. Of PrintsMaking a New Folder Initializing a Memory CardProgram AE With Special Effects Night-AliveFade/Wipe Effects Auto Focus Snapshot Mode SelectionSnapshot For Tape Recording Snapshot RecordingTo Brighten The Subject Quickly Manual FocusExposure Control To Return To Automatic Exposure ControlIris Lock White Balance AdjustmentManual White Balance Operation Balance WIPE/FADERProgram AE ExposureSystem ManualCamera Display Quality , Image Size For Playback MenuVideo Clock ADJPlayback Sound 12BIT ModeVideo Display DisplayDubbing Dubbing To Or From a VCRTo Use This Camcorder As a Player To Use This Camcorder As a RecorderDV cable Optional Core filter To DV To DV @ Core filterPlayback Special Effects Using the Remote Control Unit ENSlow-Motion Playback Frame-By-Frame PlaybackInsert Editing Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgEN Using the Remote Control Unit Audio DubbingConnection To a Personal Computer Using USB cable GR-D90/D70 onlyUsing DV cable Using USB cable B Using DV cable GR-D90/D70 onlyImage taken using Snapshot is too dark No power is suppliedFocus does not adjust automatically Snapshot mode cannot be usedDate/time does not appear Indicators and the image color on LCD monitor are not clearBlack & White Fader does not work White Balance cannot be activatedMemory card cannot be played back Charger indicator on the camcorder does Not lightAn error indication E01, E02 or E06 appears An error indication E03 or E04 appearsCassettes Using Household AC Plug AdapterBattery Packs AC AdapterMain Unit LCD MonitorAfter Use How to handle a CD-ROMFor Your Maintenance Cleaning The CamcorderTelephone Number Trade NameResponsible party AddressDigital Video Camera ConnectorsCamcorder GeneralIndex Controls, Connectors And IndicatorsLCD monitor Speaker Viewfinder Battery Release Button BATT. Release .... pg VIDEO/DSC Switch VIDEO, DSC GR-D90/D70 onlyFast-Forward Button USB Universal Serial Bus Connector Power Switch1024 During Both Tape And Memory Card Recording LCD Monitor/Viewfinder IndicationsDuring Memory Card Recording Only GR-D90/D70 only During Memory Card Playback GR-D90/D70 onlyAppears when the focus is adjusted manually Appears when in the Squeeze or Cinema modeDisplays the sound mode for approx seconds Appears when Digital Image Stabilizer DIS isHigh E03 or E04 Unit in Safeguard Mode Eject E01, E02 or E06 Unit in Safeguard ModeAppears if a file in another format is selected Terms Unload a Tape VIDEO/DSC Switch PositionRecord-Standby SD Memory CardMemo Memo US 1102-HO-UN-PJ
Top Page Image Contents